PID temperature control with built-in PT1000 sensor provides high accuracy of temperature control
LED display shows the set or actual temperature clearly
Short circuit protection, over-current/overload protection, and delayed start protection
Integrated design of drain outlet and coolant circulation outlet for convenient operation
German-made pump that is environment-friendly, quiet and durable
The compressor employs state-of-the-art R290 environmentfriendly refrigerant to protect environment and human health
-
-
Features : ◆ High chemical resistant ◆ No air pollution, maintenance free ◆ Quiet and low vibration ◆ Thermal protection device Chemker series pump equipment are driven by Diaphragm without the need of lubricant, regular oil changes and maintenance; with no oil pollution. All wetted parts of Chemker series pump are made of PTFE material which can resist most of corrosive gases. Driven direct by motor with no additional belt-driven transmission; the quality vibration-proof assembly makes Chemker series run at the lowest noise level among all other equivalent pumps. Every motor of Chemker series pumps has a built-in thermal protection device to shut off the pump automatically when overheated and then resume working when the temperature cools down. -
FeaturesIdeal for manual operation due to its light weight and ergonomic design.Processing range: 0.1-50mL or 1-250mL.316L stainless steel shafts are fully autoclavable and inert for highly corrosive solutions.All shafts are interchangeable for easy dismantling and cleaning.6 modes of motor speed from 8,000 to 30,000 rpm. -
FeaturesViscosity up to 10,000 mPas.6 modes of motor speed from 10,000 to 30,000 rpm.All-round safety guarantee for motor drive, overload protection and smooth operation.316L stainless steel shafts are fully autoclavable and inert for highly corrosive solutions.Easy dismantling for fast preparation.All shafts are interchangeable for easy dismantling and cleaning. -
FeaturesIdeal for microfiltration and quick spin-downs.Easy-to-use with dual start/stop function.7000rpm fixed speed.Compatible with 2mLx8 and PCR8x2 rotors.Quiet running, noise level 45dB.Rotor change without tools.Accelerates and brakes in seconds.Available in two colors i.e., green, blue. -
FeaturesCentrifuge chamber door with automatic adsorption door lock design, can be closed with a single finger.Precooling, the compressor will automatically start cooling as long as the set temperature is lower than the ambient temperature.Sound indicator to prompt that the upper cover is closed to maintain the temperature inside the chamber, after centrifugation.Advanced R290 fluorine free refrigerant, low carbon and environmental protection.Maximum rotation speed can be achieved even at 4°.Up to 9 program storage capacity according to experimental needs.High-strength aluminum alloy, three layered biosafety to withstand numerous high temperature and high pressure sterilizations.Five rotors with 0.2mL, 0.5mL, 1.5mL, 2mL and 5mL centrifuge tubes/ PCR tubes capacity.An external condensation tank prevents condensate within the centrifuge chamber. -
FeaturesPowerful centrifugal force of 15100xg and max. speed of 15000rpm ideal for various applications.Brushless DC motor drive quickly accelerates the rotor to set speed.Quiet working, Low noise 56dB.D2012 is proven by IEC/EN 61010-1.D2012 Plus passed the rigorous explosion-proof test and accredited with CE, cTUVus, FCC certificates, and MCA test. MCA test according to IEC/EN61010-2-20. -
FeaturesSpecial multi-flow air cooling design with patent ensures fast cooling of the rotor and low energy consumption.Temperature display appropriate for gentle handling of sensitive samples.Three-layer sealed rotor accidental leakage during centrifugal process allowing risk-free microbial contamination.High strength aluminum alloy rotor can be fully autoclaved for unlimited service life.Four rotors are optional complete with 24 places 1.5/2.0mL tubes, bigger 5.0mL, smaller 0.2mL and 0.5mL tubes with adapters. -
Manufactured from polypropylene. These plates are extremly useful as support for crucibles, petri dishes, etc. For use at room temperature. Not suitable for use with hot crucible. -
FeaturesSpeed range of 300-4000rpm.3 programs storage capacity for routine applications.Automatic internal diagnosis.Maintenance free brushless DC motor. -
FeaturesEasy programming to achieve high accuracy of speed control.Easy operation with intuitive menu and easy-to-read display.Rotor speed can be set and displayed by RPM or G-force.Maintenance-free brushless DC motors.Quick spin function with press and hold pulse key.Lid with electric lock and automatic release function saves processing time and prevents samples overheating.Automatic self-diagnosis on startup showing accumulative running time and last running parameters.Braking time 2 gears adjustable (for A6-50P rotor).A12-10P and A6-50P are not interchangeable. -
Featuresspeed range of 300-4500rpm.Individual control of speed and time.Faster acceleration and deceleration.Perfectly suitable for 15mL cell culture tubes and a full line of collection tubes. -
FeaturesMax. speed 4000rpm.Rotor speed can be set in RPM/RCF, with 3 programs storage capacity for routine applications.Max. capacity 50ml4, Adapt to different sizes of blood collection tubes and centrifuge tubes suitable for swing out rotor and angle rotor.Automatic internal diagnosis and self-detection.Maintenance-free brushless DC motor. -
FeaturesA wide range of measurement and control, 1-1,000mbar.Two control modes of single-point control and programmed control available for choice as needed.Can store up to 5 programs, each containing up to 5 segments of programming control.A large-size TFT touch screen display control allows easy operation.All parts in contact with vapor or liquid are made of PTFE, ceramics or other high-performance materials and can effectively resist corrosion caused by organic solvents, water, acid and alkali.A built-in vent valve can feed inert gas into system equipment.One-stroke decompression allows easy installation and dismantling of vacuum system.Can be connected with pump power control for temporary shutdown of pump power supply after reaching stable degree of vacuum for energy conservation and environmental protection. Can also be operated in the normally open statue of pump. -
FeaturesMax.speed is 12000rpm, max. RCF 13680g.Precise control of speed and time separately.Rotor capacity: Hematocrit rotor: 24 capillary. -
FeaturesSpeed range of 200-14000rpm, max. RCF 18620g.Precise control of speed and time separately.Easy operation with intuitive menu and easy-to-read display.Maintenance-free brushless DC motors.Pulse operation for quick spins.Rotor capacity: Hematocrit rotor.Hematocrit rotor:24 capillary max. speed:12000rpm.Maintenance-free brushless DC motors.Tube rotor: 1.5/2mL24 max. speed: 14000rpm. -
FeaturesMaintenance free brushless DC motor.Rare earth magnets give powerful stirring.Stepless speed regulation 300-2000rpm.PET top provides excellent chemical resistance.Ultra silence and vibration-free design.Shaft can be fitted with a PH sensor or sensors for other purposes. -
Dragon 300 is used to rapidly sterilize loop, needle and culture tube by electric heating inside the chamber. No spattering of microorganisms and cross contamination through an open flame generated from fuel combustion. Equipped with a powerful heating element enabling Dragon 300 to reach up to 850℃ fast and the temperature is adjustable. Dragon 300 heavier base, friendly loop rack and adjustable angle of heating chamber up or down from 45 to 75 degree make them the best mates with laminar flow hood and anaerobic chamber. Applications : ◆ Culture tube sterilization ◆ Inoculating loops and needles sterilization -
EU50 multi-function mixer is suitable for general mixing experiments. It has a variety of functions, such as timing control, speed memory, dynamic curve display of speed and torque, temperature measurement and display, torque compensation, and so on. It is easy to operate and meets various experimental requirements. • Suitable for mixing liquids of varying viscosity in the laboratory. Refer here for the optional Stirrer Shafts -
EU70 multi-function mixer is suitable for general mixing experiments. It has a variety of functions, such as strong stirring, timing control, speed memory, dynamic curve display of speed and torque, temperature measurement and display, torque compensation, etc. This model can be equipped with a data connection function, to meet diversified R&D needs. • Suitable for mixing liquids of varying viscosity in the laboratory. Refer here for the optional Stirrer Shafts -
The EU series is a new laboratory universal stirrer of FLUKO. EU90 is equipped with a more powerful motor, which can easily complete the mixing experiment of high viscosity system. At the same time, it has functions such as timing control, speed memory, speed and torque dynamic curve display, temperature measurement and display, torque compensation and other functions. The sensitive touch buttons and one-button shuttle knob make the operation easier, and all operations can be completed with one hand. With the PC-side software, the experimental data can be completely output, and the experimental process records can be completed synchronously to meet diverse research and development needs. Refer here for the optional Stirrer Shafts -
Hand-held operation, the minimum processing capacity can reach 0.1mL, widely used in the biochemical field, testing industry, medical diagnosis, health and epidemic prevention experiments. -
Stepless speed change, equipped with two working heads, capable of meeting the different processing capacities of the laboratory. The utility model benefits from low noise, convenient speed regulation, wide processing range, stable operation and convenient cleaning. •Emulsification, dispersion, homogenization, liquid / liquid mixing, etc. -
High speed motor, unique stator and rotor structure. Super shearing force rapidly reduces the size of liquid drops, to produce finer, more uniform material. The utility model can simulate the laboratory inline process. Highly efficient, achieving homogeneity without dispersion or dead angles. Suitable for inline processes and circular materials for dispersal, emulsifying, homogenization and mixing -
Portable micro homogenizer equipped with high speed and high precision two homogenate host work knife head, medical scissors, tissue forceps, burette, centrifuge tube, and bottle. Hand operated lightweight and convenient the large capacity battery. Suitable for outdoor or laboratory mobile operation. Animal and plant tissue fragmentation, homogenates, medical diagnosis, micro dispersion, emulsification, and homogenization. -
Portable micro homogenizer equipped with high speed and high precision two homogenate host work knife head, medical scissors, tissue forceps, burette, centrifuge tube, and bottle. Hand operated lightweight and convenient the large capacity battery. Suitable for outdoor or laboratory mobile operation. Animal and plant tissue fragmentation, homogenates, medical diagnosis, micro dispersion, emulsification, and homogenization. -
Portable micro homogenizer equipped with high speed and high precision two homogenate host work knife head, medical scissors, tissue forceps, burette, centrifuge tube, bottle. Hand operated, lightweight and convenient the large capacity battery. Suitable for outdoor or laboratory mobile operation. Animal and plant tissue fragmentation, homogenates, medical diagnosis, micro dispersion, emulsi-fication and homogenization.
-
High-speed motor (digital display is optional), can be equipped with a variety of agitator, the maximum speed up to 28000rpm, and the tip speed up to 27m/s. Integrating dexterity, convenience, and high scalability, the whole machine has a modular structure and is easy to operate. It can run for a long time and can easily meet a variety of high-demand dispersion and emulsification experiments. Suitable for a variety of different processes, including dispersing, emulsifying, homogenizing, wet grinding, dissolving, suspension preparation, breaking of animal and plant tissues, superfine homogenizing, etc. -
High-speed motor (digital display is optional), can be equipped with a variety of agitators, the maximum speed up to 28000rpm, and the tip speed up to 27m/s. Integrating dexterity, convenience, and high scalability, the whole machine has a modular structure and is easy to operate. It can run for a long time and can easily meet a variety of high-demand dispersion and emulsification experiments. Suitable for a variety of different processes, including dispersing, emulsifying, homogenizing, wet grinding, dissolving, suspension preparation, breaking of animal and plant tissues, superfine homogenizing, etc. -
High power, high speed motor, rotation speed up to 25000rpm, tip speed up to 35 m/s, and the maximum batch processing capacity is 10000mL. High torque design with choices of agitators. Compatible with the FA25 agitators. Modular structure of the whole machine, easy to operate. Suitable for dispersing, homogenizing, emulsifying, mixing and crushing with high fineness. Quick and effective. -
High power, high speed original motor, tip speed up to 35 m/s. High torque design with a choice of working heads. Compatible with the FA25 type working head. Modular structure with convenient operation. The utility model is suitable for dispersing, homogenizing, emulsifying, mixing and crushing with high fineness. Quick and effective. -
Out of stock
High power, high speed motor, rotation speed up to 23500rpm, tip speed up to 40 m/s, and the maximum batch processing capacity is 15000mL. Strong torque design, and modular structure of the whole machine, easy to operate, can meet a large number of experiments. Suitable for dispersing, homogenizing, emulsifying, mixing and crushing with high fineness. Quick and effective. -
High power, high speed motor, rotation speed up to 23500rpm, tip speed up to 40 m/s, and the maximum batch processing capacity is 15000mL. Strong torque design, and modular structure of the whole machine, easy to operate, can meet a large number of experiments. Suitable for dispersing, homogenizing, emulsifying, mixing and crushing with high fineness. Quick and effective. -
The laboratory test type equipment for accurate production simulation from small tests to industrialization, providing a basis for inspection of the production process and selection of large production equipment. Interchangeable work heads allow for operation in multiple environments. Integrated control, variable frequency speed regulation, speed display, electric lift and other functions. Pilot for mixing, dispersing, homogenizing, emulsifying, solid-liquid mixing and other processes. -
Designed for medium testing, analog production and small batch production, with a maximum throughput of 50 L. The rotor can be freely replaced for different materials and process requirements. Highly suitable for completion, dispersion, emulsification, and homogenizing, it offers frequency conversion, speed display, electric lifting or manual hydraulic lifting, and other functions. Pilot for mixing, dispersing, homogenizing, emulsifying, solid-liquid mixing and other processes. -
With a high speed pneumatic motor, the structure is light, safe, and easy to operate. Suitable for explosive or dangerous areas of experimental work. Compatible with FA25 series agitators. The utility model is suitable for dispersing, emulsifying, homogenizing and mixing containing machines, solvents or other inflammable and explosive materials. -
Easily finalizes inline dispersion, emulsification and homogenizing of the laboratory, to provide accurate reference for production and use. Compact in structure, stable in operation, adjustable in speed, and meeting hygienic requirements. Suitable for fine dispersion, crushing, homogenizing and mixing. -
Equipped with three sets of high precision fixed rotors with adjustable speed and display, suitable for accurate transition from small tests to production simulations, providing a strong basis for inspecting production processes and selectiing large production equipment. The interchangeable equipment head and rotor meet hygienic standards, and can be configured according to experimental requirements. Suitable for fine dispersion, cell disruption, homogenization, mixing. -
Manufactured from PP/PC. The desiccator is implosion proof and will take vacuum of -740mm Hg with loss (absolute zero -760 mm/HG) not exceeding 20mm Hg in 24 hours. The transparent polycarbonate cover seals onto a neoprene '0' ring set into the flange of the PP base. To help with establishing the initial vacuum, grease can be applied on the 'o' ring. Within the desiccator is a removable pan for holding a drying agent. Vacuum release tap/non return valve assembly is included (Art. 229); specially grooved stopper in this assembly allows air when required to be re-admitted very slowly to avoid disturbing the contents. Usage instruction: •Remove the cover in PC - insert the samples in the pan •Open the vacuum retention valve (PE needle) and connect the tube of the pump to the desiccator spigot to create vacuum. •Close the vacuum retention valve after -
Fisco lab reactors have a working capacity of 1 L, 2 L, 5 L and 10 L, suitable for dispersing, emulsifying, homogenizing, mixing, reacting, fermenting, cream perpetrating, polymerizing, and synthesis reacting under vacuum or pressurized conditions. Incorporating a macro mixing system, micro emulsifying system, vacuum system, temperature control system, and multi-sensor detecting system, they can fully simulate industrial production. -
FeaturesA wide range of speed from 15 to 1500rpm.Automatic reverse rotation for excellent mixing.Protection class (IP65).PET top provides excellent chemical resistance.Ultra silence and vibration-free. -
Stepless speed change and strong torque output for dispersal, emulsification, homogenization, mixing and other experiments. Different stators can be replaced by a single step. Suitable for dispersing, emulsifying, homogenizing and mixing of medium viscosity material solids and liquids. -
High-performance motor, strong torque output, accurate speed display, and three different stators, capable of dispersing, emulsifying, homogenizing and other functions in the laboratory. -
Double stator design, stepless speed change and strong torque output. The double stator structure increases the shearing effect twofold. It is equipped with many kinds of stator and can be used interchangeably according to process requirements. Suitable for dispersing, emulsifying, homogenizing and mixing of medium viscosity materials solids and liquids. -
Powerful mechanical mixing, with speed and torque adjustment, automatic torque compensation, constant speed output, speed display and other features. Reliable structure with excellent performance, offering continuous operation over hundreds of hours. • Suitable for mixing liquids of varying viscosity in the laboratory. Refer here for the optional Stirrer Shafts -
Features : ◆ Four digital displays ◆ Multi-counting average ◆ Exclusive BACK button ◆ Suitable for Petri-dishes in various diameters ◆ Pressure sensor design 4 digit display offers convenience of showing the present and previous three count values. Galaxy 330 can make average count from multiple counting. The BACK button covers the convenience of deducting data when over counting. Galaxy 330’s adjustable dish holder can accept most Petri-dishes in a wide range of diameters from 90 to 150 mm or 60 mm. Pressure sensor design can allow user to operate with any marking pens. No worry about sample spoiled or contaminated. Legal Information Galaxy 330 is a registered trademark of Rocker Scientific Co., Ltd -
Manufactured from PVC/PMP/FEP. The high precision plastic burettes (according to DIN 12700 standards - Class B) is useful for routine work to eliminate the danger of glass breakages. The combination of the different plastic materials (PMP, FEP, PVC) provides a good resistance to chemicals. The stopcock assembly is molded in one piece with FEP key, requiring no lubricant and providing a leak-proof seal. -
Made of High Impact PS. Light, Portable hand operated vacuum pump. Attains a vacuum of 625mm Hg (25"). Pumping rate is 15ml per stroke. Built in vacuum release valve. Can be used as pressure pump by transferring release valve cap to vacuum port. Nozzle fits standard 6mm (1/4") i.d tubing.
