-
Dispensing pump made of PP operated by a unique lever-action stroke. Delivery of approximately 10 ounces (ab. 300ml) per stroke, with capability of 6 gallons per minute (ab. 22-23 litres/min). Will handle the most viscous materials (equivalent to SAE 90 oil) Spigot orientation of 360° allows versatility in dispensing. Complete with shank. -
FeaturesA wide range of measurement and control, 1-1,000mbar.Two control modes of single-point control and programmed control available for choice as needed.Can store up to 5 programs, each containing up to 5 segments of programming control.A large-size TFT touch screen display control allows easy operation.All parts in contact with vapor or liquid are made of PTFE, ceramics or other high-performance materials and can effectively resist corrosion caused by organic solvents, water, acid and alkali.A built-in vent valve can feed inert gas into system equipment.One-stroke decompression allows easy installation and dismantling of vacuum system.Can be connected with pump power control for temporary shutdown of pump power supply after reaching stable degree of vacuum for energy conservation and environmental protection. Can also be operated in the normally open statue of pump. -
Immersion length is measured from the bottom of 10/18 joint to lower end of mercury bulb. Accuracy is ±1°C. -
FeaturesReliable heating/cooling elements and precise temperature control.Unique design of block ensures the temperature uniformity and repeatable results.7 inch Large color touch panel screen for easy programming with user friendly software.High performance DSP and temperature control.Fast heating and cooling rate.Large user program storage. -
FeaturesReliable heating/cooling elements and precise temperature control.Unique design of block ensures the temperature uniformity and repeatable results.High performance DSP and temperature control.Fast heating and cooling rate.Large user program storage.
-
Unique design of the blade holder guarantees easy handling. The cutting blade is embedded in a holding block ensuring finger safety. It is recommended that after a certain use period the cutting blade should be exchanged for better cutting performance. For use with : Parafilm Dispenser -
FeaturesIt can accommodate up to 10 5~10ml blood vessels,or 4 50ml tubes, with different silicon mattress accessories. -
FeaturesIt can accommodate up to 16 5~10ml blood vessels,or 6 50ml tubes, with different silicon mattress accessories. -
FeaturesIt can accommodate up to 16 5~10ml blood vessels, or 6 50ml tubes on each of the two layers with different silicon mattress accessories.Tilt angle up to 40°. -
FeaturesMax. load capacity is 3kg with platform.Speed range of 0-200rpm.Wide range of platforms for use with a variety of vessels. -
FeaturesMax. load capacity is 7.5kg(O330) and 2.5kg(O180) with platform.Double LCDs for independent display of time and speed.Used with a wide variety of accessories.Maintenance- free brushless DC motor.Over speed detection and protection.Remote function provides PC control and data transmission. -
FeaturesMax. load capacity is 2.5kg(L180), 3kg (L180-S), 3kg (L180-E) with platform.Speed range of 40-200 rpm (SK-L180-S), 0-200rpm (SK-L180-E)Double LCDs for independent display of time and speed.Wide range of platforms for use with a variety of vessels.Maintenance-free brushless DC motor.Over speed detection and protection. -
Manufactured from PE/PMP. The automatic plastic schilling burettes according to DIN 12700 standards, Class B with push button for drop by drop delivery. The PE reservoir with stable PE-LD base. -
Features5L heating bath with a wide temperature range (room temp.to 180°C), independent temperature control,make it can be used separately. Water/oil heating mode can be changed only through a switch.Manual lift combined with auxiliary lift for precise positioning of the glassware.PID control ensures high temperature accuracy at 1C (water).Overheating protection temperature at 220°C.Boil-dry protection, automatically power off if heating without water/oil in the heating bath.Speed range from 20 to 200rpm, timing interval operation in clockwise and anticlockwise directions for drying process.Patented condenser (cooling surface 1200/1700cm for selection), double helix condensing tube + center circular arc design to speed up the flow rate of liquid with excellent cooling effect.Ejection mechanism ensures easy exchange of evaporating flask.Adjustable immersion angle.Patented double spring sealing ring which is made of PTFE provides an excellent sealing performance.Remote function provides PC control and data transmission.Compatible with the entire range of RE100-Pro glassware. -
FeaturesDigital display of both rotation speed and heating temperature allows for optimal control of all distillation processes.Automatic motor lift releases the evaporating flask to a safe position in case of power failure.5L heating bath with wide temperature range from room temp. to 180°C. Water/oil heating mode can be changed only through a switch.Overheating protection temperature at 220°C.Speed range from 20 to 280rpm, and interval operation in clockwise and anticlockwise directions for drying process.Patented condenser (cooling surface 1700cm) with excellent cooling effect.Ejection mechanism ensures easy removal of evaporating flask.Patented double spring sealing ring which is made of PTFE provides an excellent sealing performance.Remote function provides PC control and data transmission. -
High quality reliable pneumatic motor, with high precision overload protection, and choice of mixing paddles. For use in flammable, explosive, high temperature, dusty and other complex experimental environments for agitation, dispersion, mixing, etc. Refer here for the optional Stirrer Shafts
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
