-
Tapered Stirrer Bars are an effective stirrer with action similar to Oval/Pivot Ring type stirrer bars. -
Manufactured from PTFE. With The stoppers has excellent chemical and temperature resistance. It is self lubricating. Standard taper: 1:10. According to DIN standard 12242. Suitable for foodstuff. -
Manufactured from coloured paper with special resin adhesive that resists to moisture and most solvents. Can be used between -5°C to + 110°C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces and peels off without leaving any sticky residue. Accepts writing from almost all pen types such as pencil, ballpoint pen, solvent ink marker etc. Markings remain absolutely legible under the most demanding laboratory conditions. Supplied as white colour or as “rainbow pack” pack of 6 different colours matching the universal hazard colour codes. -
FeaturesReliable heating/cooling elements and precise temperature control.Unique design of block ensures the temperature uniformity and repeatable results.High performance DSP and temperature control.Fast heating and cooling rate.Large user program storage. -
FeaturesReliable heating/cooling elements and precise temperature control.Unique design of block ensures the temperature uniformity and repeatable results.7 inch Large color touch panel screen for easy programming with user friendly software.High performance DSP and temperature control.Fast heating and cooling rate.Large user program storage.
-
Manufactured from polystyrene. The Sample Cup for Technicon, Beckman and Konelab Analyzers. Some models an optional push-in stopper is available (Art.2514). CE certified. Technicon: T - Beckman : B - Konelab: K -
Manufactured from polyethylene. The caps can fit either plastic or glass test tubes. -
079.11.016 For 15 - 16mm tubes, up to 50 slots (5 x 10). Manufactured from modified ABS which enables the rack to be used in water baths without floating Offers a very long life cycle due to the very robust construction Bottom of each tube compartment is featured with a silicone grip that firmly holds the tubes in positioning to prevent displacement Tubes can be inserted and extracted with a gentle push or pull Racks are supplied already assembled and cannot be disambled -
Manufactured from high quality chemical and corrosion resistant AISI 304 grade stainless steel. Robust and seamless construction guarantees long life cycle Smooth polished surface provides fast and easy cleaning Offers a very long life cycle due to the very robust construction Perfect design of the tube holes firmly keeps the tubes at their position. -
Manufactured from polypropylene. The rack is specifically designed for titration work. The test tube are held in position by the upstand support. All the contents of the test tubes are visible all the time. Can withstand temperature up to 120°C and can be used in water baths. -
Manufactured from PMMA. The sturdy test tube racks have smaller holes in the lower tier of the rack hold the test tubes safely. -
Manufactured from polypropylene. The lightweight, unbreakable traditional pattern test tube rack is autoclavable and can withstand temperature up to 120°C. -
Manufactured from expanded PS. The tray is very useful for large quantities and with holes deep enough to keep the test tubes. Art. 1175 will take Eppendorf tubes type Art.298. -
Manufactured from polypropylene. The test tube is equipped with a quick closure screw cap (PE). It is leak-proof and suitable for centrifugation. The design of the cap avoids any contamination due to drops of liquid on the inner surface. The strerile packing (Art. 88304) is supplied with the screw cap fitted on the test tube. Available in :blue (04) - red (10) - yellow (06) - white (03). -
Manufactured by automated machines with consistent length and thickness Due to properties, borosilicate glass is highly recommended for over heated applications -
Manufactured from PTFE. The test tubes are excellent in chemical, mechanical and heat resistance. It can withstand temperature continuously at 250°C and 300° for short intervals. Suitable for foodstuff. -
Manufactured from neutral glass featured with a polypropylene screw cap. Hermetic caps guarantee absolute leak-proof closure. Specially recommended for tissue culture or other similar applications -
Manufactured from polystyrene (PS) with polyethylene (PE) Screw Cap. The tubes have a round bottom and are self-standing. The sterile tubes are available individually wrapped. The 25ml individual tubes have a self- adhesive label for marking. CE certified. -
060.04.001 Manufactured from high quality, corrosion resistant chromated steel for holding thermometers in the most secure way. Featured with a swivel bosshead which provides 360° swivel of the clamped object around their axis. Bosshead locking feature guarantees perfect position hold of the clamped objects. Fixing head featured with flexible springs offers easy insertion and extraction of the thermometers. Clamps can be opened and closed smoothly with a 30 mm grip diameter. -
Immersion length is measured from the bottom of 10/18 joint to lower end of mercury bulb. Accuracy is ±1°C. -
Thermotech™ Beakers, a Cowie Registered Design, feature a unique combination of pure PTFE body with a specially formulated stabilised PTFE Carbon base as a single moulding to give:- Totally inert pure PTFE inner surface
- Heatable to 280°C without distortion
- Improved heat transfer
-
Thin Wall Joint Sleeves are inserted between standard taper ground glass joints to eliminate the use of grease and prevent sticking. Sleeves have a wall thickness of about 0.05mm and will withstand low to medium vacuum. -
Electronic timer counts up to 19 hours, 59 minutes with a 4 digit display for extended hours. Also featured with countdown function. A clear bell ring signals at the end of the pre-set time. A large LCD screen with 32 x 12 mm dimensions provides easy reading option from relatively long distances. The folding stand at the back housing offers a convenient angle for easy reading. Also featured with a clip at the back side. -
Electronic timer counts up to 59 minutes, 59 seconds with a 4 digit display. Also featured with count-down function. A clear bell ring signals at the end of the pre-set time. A large LCD screen with 50 x 26 mm dimensions provides easy reading option from relatively long distances. The folding stand at the back housing offers a convenient angle for easy reading of the results. A clip at the back side of the watch enables easy wall mounting. -
Electronic timer counts down with selected intervals of 10 seconds / 1 minute / 5 minute and 10 minutes. A clear visual and audial signal flashes at the end of the selected time. The LCD screen with 30 x 80 mm dimensions provides easy reading option from relatively long distances. The folding stand at the back housing offers a convenient angle for easy reading. A clip at the back side of the watch enables easy wall mounting. Can be hanged on metal surfaces with the two magnets provided at the back. -
Mechanical timer counts up to 60 minutes with 1-minute resolution. No need for batteries. Just winding will be enough to start the time counting. A clear bell ring signals at the end of the pre-set time. Can be interrupted during work and reset any time. Can be used on bench top or also can be hanged to any smooth surface. -
Mechanical timer counts up to 60 minutes with 1 minute resolution. Does not require batteries. Just winding will be enough to start the counting. A clear bell ring signals at the end of the preset time. Can be interrupted during work and reset any time. -
Mechanical timer counts up to 60 minutes with 1-minute resolution. No need for batteries. Just winding will be enough to start the time counting. A clear bell ring signals at the end of the pre-set time. Can be interrupted during work and reset any time. Can be used on bench top or also can be hanged to any smooth surface. -
Mechanical timer counts up to 60 minutes with 1 minute resolution. Does not require batteries. Just winding will be enough to start the counting. A clear bell ring signals at the end of the preset time. Can be interrupted during work and reset any time. -
Mechanical timer counts up to 60 minutes with 1 minute resolution. A large screen with 150 mm diameter provides easy reading option from relatively long distances. Featured with a red marked area for remaining time for long distance observation. Can be used on bench top or also can be hanged to any smooth surface. -
Manufactured from virgin cadmium-free Polypropylene. Compatible for Kartell, Biohit, Gilson, finnpipette, Labsystem The tips has high clarity and excellent water-repellent properties designed to keep sample retention within the tip to a minimum. The precise centering of the orifice at the end of the tip guarantees a reliable directionality of the sample when delivered. The tips delivers excellent results even if used with other micropipette brands available on the market. -
Manufactured from PC/PP. Rack contains 96 tip/rack. Blue tips compatible for Eppendorf, Gilson, Socorex, Finnpipette, Brand, Hamilton
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
