-
Kartell Art. 540 Dimension (mm) 100x120x140h Manufacture from ABS/ PS. For finger print free dispensing of 76x26mm microscope slides from dust. Each side is dispensed by rotating the knurled knob on either side of molded base rubber roller at the sides of the slides ease out the slider which can then be handled by the edges -
Molded in white PVC for easy identification of different dyes on the slides. Ideal work station for 76x26mm slides. Designed for easy removal of slides. -
Molded in PMP for use with Art. 354. Supplied with 2 lids - one lid for use when dish is not in use, providing evaporation-free storage of staining liquid - the other lid with special opening to allow handle of staining rack Art. 354 to be inserted; Xylene can cause etching after 2 days at room temperature. -
Staining rack made of PP with horizontal tray, holds 20 slides 76x26mm (3"x1"). For use with Art. 353 -
PMP staining jar holds 76x26mm (3"x1") slides vertically. Eight grooves. Supplied with PMP cover. Can accommodate 16 slides back to back. Xylene can cause etching after 2 days at room temperature. -
Art. 351 Internal Dimension 76x65x45mm PMP staining jar for 76x26mm (3"x1") slides. Ten grooves. Supplied with PMP cover. Can accommodate 20 slides back to back. Xylene can cause etching after 2 days at room temperature. -
Manufactured from Polyoxymethylene (POM). The staining trough is 25 slides; accommodating one rack, Art. 1100. It can also be used as a mailing box. -
Storage Box only; can take up to 4 staining racks. Art 1100, for a total quantity of 100 slides. -
Manufactured from Polystyrene. Cylindrical containers in PS material, wide mouth with snap-on lid. -
Art. 356 Made from Polyethylene. With three round depression. Particularly useful for colorimetric tests. -
Made from Polystyrene. For colorimetric Assay. -
Made of PMMA. Clear acrylic resin microscope cover with a square base; protects against dust and dirt. -
Manufactured from PP/PC. The desiccator is implosion proof and will take vacuum of -740mm Hg with loss (absolute zero -760 mm/HG) not exceeding 20mm Hg in 24 hours. The transparent polycarbonate cover seals onto a neoprene '0' ring set into the flange of the PP base. To help with establishing the initial vacuum, grease can be applied on the 'o' ring. Within the desiccator is a removable pan for holding a drying agent. Vacuum release tap/non return valve assembly is included (Art. 229); specially grooved stopper in this assembly allows air when required to be re-admitted very slowly to avoid disturbing the contents. Usage instruction: •Remove the cover in PC - insert the samples in the pan •Open the vacuum retention valve (PE needle) and connect the tube of the pump to the desiccator spigot to create vacuum. •Close the vacuum retention valve after -
Manufactured from polypropylene. These plates are extremly useful as support for crucibles, petri dishes, etc. For use at room temperature. Not suitable for use with hot crucible. -
Manufactured from polypropylene. The pump works on pressure up to 10Kg/cm2. The built in non-return valve will eliminate any back flow. Can be easily dismantled for cleaning and autoclavable. -
Manufactured from PP inner Disk: Dutral The non-return valve prevents water from flowing back when the pressure falls. It is useful for any tubing system and vacuum line. The Maximum safe working pressure is 2Bar (approx. 28.4P.S.I), and the Minimum safe working pressure is 0.07 Bar at room temperature 20°C.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
