-
Manufactured from polypropylene. The two-piece construction buchner funnel is lightweight, robust, unbreakable, and resistant to corrosion and heat. The top and bottom can be separated for easy and total cleaning. It is Autoclavable and has a Excellent chemical resistance. Suitable for foodstuff. -
Manufactured from polyethylene. The disk is a useful interface between the filter paper and perforated Buchner plate. It helps avoid the clogging of the filter holes. The texture is 300 micron(μm). -
Made of High Impact PS. Light, Portable hand operated vacuum pump. Attains a vacuum of 625mm Hg (25"). Pumping rate is 15ml per stroke. Built in vacuum release valve. Can be used as pressure pump by transferring release valve cap to vacuum port. Nozzle fits standard 6mm (1/4") i.d tubing. -
Manufactured from polypropylene. The Analytical Funnel is designed specifically for analytical chemistry. Each size takes a standard size filter paper. The body of the funnel is exactly 60° angle. Designed with external and internal ribs, the funnel is autoclavable. Suitable for foodstuff. -
Made of PP. The 60° angles sides are provided with ribs for fast filtration and allow the use of standard size filter papers. Suitable for foodstuff -
Dispensing pump made of PP operated by a unique lever-action stroke. Delivery of approximately 10 ounces (ab. 300ml) per stroke, with capability of 6 gallons per minute (ab. 22-23 litres/min). Will handle the most viscous materials (equivalent to SAE 90 oil) Spigot orientation of 360° allows versatility in dispensing. Complete with shank. -
Made of High Impact PS. The back plate of the 72 place support is made from a single mold of 4 mm rigid HIPS. The peg sockets have closed ends eliminating leakage and consequent bio hazards. The seamless drip channel collects waste which drains via drain tube provided. 72 push in pegs which can accommodate items with “neck” bore in excess of 15 mm are supplied and 11 small pegs of diameter 6 mm for small diameter items such as test tubes. They are easily removable for cleaning or to accommodate particularly shaped items. This rack will not stain or rust. Comes complete with mounting kit, draining hose, and fixing template. Additional racks can be joined together to make a bank of racks, using the joining plugs provided. Supplied with draining kit (connector + tubes). Discharging tube: internal 11 mm, external 13 mm. -
Manufactured from polypropylene. The single or double holder is made for funnels as small as 25mm (with adaptor supplied) and up to 170mm. Without the adapter, it can be used with powder funnel with stem diameter not exceeding 35mm. Two olives are provided for use with rods from 8-14mm. -
Manufactured Polyoxymethylene (POM). The plastic clamps are made for the safe connection of standard-finish glass conical joints. It is corrosion proof and will not scratch glasses. Available in various colors according to the dimension. Autoclavable. -
Manufactured from Glass Fibre Nylon. The Spatula is made according to DIN 12890 standard. These range of robust, inexpensive general purpose spatulas has an excellent chemical resistance. The scraper plus spoon or double scraper configuration is suitable for use in food and beverages industry. Autoclavable, and suitable for food contact (NSF/ANSI Standard 51). -
Manufactured from Polyoxymethylene. The self-sprung forceps with rounded ends is autoclavable. The middle are molded with lines for better gripping. -
Manufactured from polypropylene. The Boss head is supplied with two olives so that the clamp can fit on to the support rods. having diameters 8-14mm. The stainless steel spring loaded centre arm can hold the burette firmly against the two outer arm and is protected by rubber grips. The graduation and meniscus are visible at all times. Made suitable for all burettes. -
Manufactured from polypropylene and comes with chromium plated steel rods. The rods are 25cm standard length and can be screwed together to obtain the desired height. Each base is supplied with two rods. -
Manufactured from polypropylene. Ø160, 49mm height. The round bottomed flasks from the smallest up to 10 litres can be supported safely on the internal "steps" of this support. Can withstand hot flasks up to 100°C (120°C for short periods) without damaging the holder. Autoclavable. -
Manufactured from Polymethylmethacrylate (PPMA). The bench pipette holder has high level finishes and its content can be seen from any angle. Complete with four tilted support shelves and a white top. The four separate compartments are ideal for housing plastic or glass serological pipettes of various capacities (from 1 to 50ml). Do not shine ultraviolet light on it.* -
Manufactured from polyethylene/polypropylene. The automatic rinsing set solves the problem of washing pipettes up to 600mm long and Mohr burettes quickly and safely. The PE rinser fills via the spray nozzle that is situated at the top rim, which will prevent back-siphoning.The contaminated water will be siphon out once the siphon point at the top of the rinder has been reached. The pipettes/burettes are housed in a specially designed basket which minimizes breakages as it buffers the tips of pipettes against the soft PE base. two or three basket of pipettes/burettes can be soaking in their jars whilst another basket full is being washed in the rinser. Suggested basic set:Pipettes Burettes 1x217 1x215 2x219 2x219 1x218 2x1219 1x218
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
