-
Manufactured from polypropylene. The bottle is autoclavable and ideal for transporting toxic waste waters, boiler feed water, etc., back to laboratory for analysis as the samples can be secured using shoulder and cap tag to avoid sample contamination in transit. The product conforms to DIN 13316 and 168. Remove the cap before autoclaving. Suitable for foodstuff. Refer here for caps -
Body Manufactured from polyethylene, cap from polypropylene. The spacing saving bottle is ideal for long term storage of samples. Approximate graduations allow reproducible filling without the use of cylinders/beakers. Easy grip caps can be wired down for security. Suitable for foodstuff according to: EC regulation 1935/2004 EC Regulation 10/2011. -
Manufactured from polymethylpentene (PMP). The cylinders conforms to ISO 6706 - 1981 (E) and BS 5404 part 2 1977. The special PMP material is crystal clear, autoclavable and can be used for liquids up to 170°C. The PMP is chemically no-absorbant and has an excellent chemical resistance Permanent graduations are moulded in for reproducibility. The pentagon base adds stability for the cylinder. Suitable for foodstuff. -
Manufactured from polypropylene. The cylinders conforms to ISO 6706 - 1981 (E) and BS 5404 part 2 1977. The special PP material gives high translucency, autoclavable to 121°C for 20 min and has an excellent chemical resistance. Permanent graduations are molded in for reproducibility. The pentagon base adds stability for the cylinder. Suitable for foodstuff. -
Manufactured from polyethylene. The graduated general purpose bottle meets the food and drug regulation with pictograms. The long neck thread ensures a leak-proof closure.With a wide neck, filling and emptying of liquid or powder samples will be much easier. This product conforms to DIN 13316 and 168. Suitable for foodstuff. -
Will withstand considerable pressure before rupture. Secured by tagging points on bottle and cap. Confidential notes can be placed in the space between insert sealing plug and cap. Suitable for Foodstuff. -
Manufactured from polypropylene. The wide neck bottle is autoclavable and meets the food and drug regulation with pictograms. The long neck thread ensures a leak-proof closure, and the wide neck allows easier filling and emptying of liquid and powder samples. Conforms to DIN 13316 and 168. Suitable for foodstuff. -
Manufactured from HDPE, the useful general purpose tanks can be stacked for storage. -
Inner Joint with a sealed on lower tube extending 6" below the grind, having the same OD. tubing on both ends of the grind. -
Made of High Impact PS. Light, Portable hand operated vacuum pump. Attains a vacuum of 625mm Hg (25"). Pumping rate is 15ml per stroke. Built in vacuum release valve. Can be used as pressure pump by transferring release valve cap to vacuum port. Nozzle fits standard 6mm (1/4") i.d tubing. -
H200001 Aluminum heat transfer block, used in place of a sand both in microscale experiments. It has holes to hold 3.0 and 5.0mL heavy wall reaction vials and four Craig crystallization tubes, one hold on the top for a standard thermometer. -
Aluminum heat transfer block, used in place of a sand both in microscale experiments. It will hold 5, 10, 25mL round bottom flasks, one hold on the top for a standard thermometer. -
Manufactured from HDPE. The highly resistant heavy walled carboy bottle with o-ring seal cap makes it leakproof. The cap can be wired down for added safety. Complete with carrying handles. Suitable for foodstuff. -
High resistant bottle, ideal for liquid or powders. Wide mouth for easy filling and emptying. Insert plug added. The caps can be wired down for safety. Tommy bar lugs on 10L capacity to assist release. Suitable for foodstuff. -
Non-polar hydrocarbon solvent, 5 L bottle; also known as n-hexane; CAS 110-54-3 -
Cowie HP Shaft Guides provide an effective guide for use with GLASS and METAL Shaft Stirrers over a wide range of temperature without shedding particles from a specially formulated PTFE-PEEK seal whilst maintaining vacuum. Maximum recommended speeds are 500rpm continuous or 800rpm intermittent
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
