-
GVS PCTE Membrane is made from a thin, microporous polycarbonate film material. It is ideally suited for use in blood assays and high-purity and general filtration. Though polycarbonate is hydrophobic, the membrane is treated with a wetting agent to make it hydrophilic. Features and Benefits • Smooth, thin, glass-like surface: Planar surface makes it ideal for particle identification by microscopy • Superior strength: Tensile strength of 207 bar (> 3000 psi) maintains pore size and density, and will not stretch • Low extractables: Ensures tests will be clean promoting consistent results • Low protein binding • Negligible absorption/adsorption:Maximizes critical solution recovery -
Features and Benefits • High range of chemical compatibility: Resistant to a wide range of chemicals • Smooth, thin, glass-like surface: Captures all particles on the surface larger than the pore size • Precise pore size and density: Provides flow control for liquids moving through the membrane capturing 100 percent of cells larger than pore size • Low extractables: Ensures tests will be clean promoting consistent results • Low protein binding: Low binding prohibits absorption of cells being filtered • Negligible absorption/adsorption:Maximizes critical solution recovery -
Manufactured from polypropylene, the 60° angle autoclavable funnels has an excellent chemical resistance and can be use with liquids. The Large bore avoids bridging of powders during transfer with its ribbed outside to avoid pressure lock. -
GVS capsules are disposable filtration units designed for the removal of particles or bacteria from aqueous or solvent solutions and gas streams. They are ready to use, eliminating the need to disassemble, clean and reassemble filter housings. GVS capsules contain no glue or surfactants and feature serial layer filter design for increased throughput and extended life. Two upstream vents are included to facilitate venting in any position. All capsules containing membrane media are preflushed with purified water to reduce extractables. GVS capsules pass class VI toxicology testing and are integrity tested prior to shipment. Capsule filters are available in sterile and non-sterile versions. -
Looped Logic provides a full range of accessories although the cabinets are under standardized manufacture. Customized service is available to be adapted to different application. -
PPE Cabinet designed with two compartments for chemical protective clothing hung on aluminium alloy rails, and other PPE, etc. High quality hinges of easy maintenance and replacement. Excellent workmanship, with good corrosion resistance and durability. Equipped with a safety hammer, embedded at the up right front corner, easily acquired when needed. -
Heavy wall cylindrical vessels have an internal thread for use with a 15mm Teflon bushing as a pressure seal. This unique design allows hand tightening and loosing for easy access into the vessel. The O-ring is positioned on the bushing above the thread for improved sealing. The vessels are useful for pressure reactions and applications such as polymerization and analysis of halogens by thermal decomposition in the presence of lime. Complete apparatus is supplied with vessel, Teflon bushing and Viton O-ring. -
Heavy wall round bottom vessels have an internal thread for use with a 15mm Teflon bushing as a pressure seal. This unique design allows hand tightening and loosing for easy access into the vessel. The O-ring is positioned on the bushing above the thread for improved sealing. The vessels are useful for pressure reactions and applications such as polymerization and analysis of halogens by thermal decomposition in the presence of lime. Complete apparatus is supplied with vessel, Teflon bushing and Viton O-ring. -
Manufactured from natural rubber with a special design that keeps the funnel and filtering flask always in the center. These adapters also provide all-around protection reducing impact damages. Also, a clean seal is created between the flask rim and the funnel neck. -
Overall design protective suit with hood and without pockets. Closure is provided by a zipper. Featured with rubber fasteners at the wrist. For single use. Manufactured for employees and visitors protection at laboratories. Slightly porous texture of the textile guarantees air permeability and prevents sweating during use. Light weight. Easy to wear. Soft and flexible texture offers full comfort during use. -
Manufactured from high-density antistatic polyethylene, providing an ideal balance of protection, durability, and comfort. Offers chemical protection according to category III ( type 5 & 6 ). Also offers an excellent barrier against fine particles down to 1-micron size. Protective suit with the overall design perfectly suitable for cleanroom areas. Also practical use at pharmaceutical handling and many others. Guarantees air permeability and prevents sweating during use. Repels water-based liquids and aerosols. Optimised body fit provides excellent wearer comfort. Featured with hood compatible with filtering face masks. Featured with rubber fasteners at the wrist and around the face. Closure is provided by auto-lock zipper with flap for increased protection. Lightweight. Easy to wear. Flexible texture offers full comfort during use. -
Connectors with bayonet fittings are for use with flexible tubing in PTFE, VITON, Silicone rubber or similar materials. The connectors are pure PTFE and may be sterilized at 135°C -
Adjustable Rotors slide over standard shafts and lock in place to give the most effective stirring patterns. All PTFE with glass filled PTFE lock nut. Rotor diameters are nominal. -
Adjustable Rotors slide over standard shafts and lock in place to give the most effective stirring patterns. All PTFE with glass filled PTFE lock nut. Rotor diameter are nominal. -
Adjustable Rotors slide over standard shafts and lock in place to give the most effective stirring patterns. All PTFE with glass filled PTFE lock nut. Rotor diameter are nominal.
-
Shaft Stirrers have a unique, fully moulded construction featuring a PTFE rotor moulded to a fully PTFE encapsulated steel reinforced drive shaft. • Chemically Inert • Easy to clean • No cross contamination • Unbreakable • Non Scratch •Use up to Ca. 280°C •Exposed stainless steel core version (EX) for extra rigid clamping in drive chuck (exposed length 50 mm)
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
