-
Manufactured from polyethylene. Specially designed for a fast and effective crushing of solid samples to the liquid phase. Sterilized with gamma irradiation, free of RNase, DNase, and pyrogen. Even at low temperatures, they maintain the stability of the specimen’s microbiological status. While working with infectious samples, bags can be sealed by any ordinary bag sealer to prevent the escape of aerosols. -
BAG STAND - “stainless steel”: Manufactured from AISI 304 grade stainless steel for hanging homogenization bags. Can carry 4 homogenization bags of any type. BAG LATCH: Manufactured from a special grade of polypropylene for quick closing of the bags. The practical closing system guarantees perfect and tight closure of the bags. Color coded in 4 different colors for fast and easy identification. -
Excellent tools for washing and cleaning of all type of laboratory bottles, flasks, tubes, condensers, burettes etc. Brush material is manufactured from the highest quality of fibre/perlon for a long life cycle. Brush stem is manufactured from corrosion proof twisted steel wire. Brush handle is manufactured from polypropylene and offers extremely easy handling and use of the brush. Unique handle design enables hanging of the brush to a convenient place for easy reach. Spherical sponge top part enables access to every corner of the labware and guarantees perfect cleaning results. -
Specially recommended for all labware with a cylindrical form such as cylinders, beakers, vertical tanks and other similar flasks. Guarantees perfect cleaning with its spherical cleaning brush part that touches every surface and corner of labware’s interior. -
Specially recommended for hoses, tubings with diameter from 12 mm to 25 mm. Perfectly adapts to the rounding of the tube and flexible long handle enables even the round labware can be cleaned effectively. -
Specially recommended for tubes due to the unique design which fits all tube sizes from the smallest to the largest diameter. Consists of two parallel cleaning brush rods hold to be a single head. The rods can be pulled and moved to sides. This feature enables the contact of the brush all over the interior surface of different tubes with different diameters. This tube brush with its unique features guarantees fast and very effective cleaning of all tubes with different size and length. -
Specially recommended for curved and cornered shaped labware such as round bottom flasks. Uniquely designed convex swivelling brush head gets contact with all over the surface of the flask including difficult curves and corners and enables thorough cleaning. The brush head has a slightly convex shape for fast and effective cleaning even also at heavy soiled flasks. Strong yet flexible bristles provide long lasting trouble free life cycle. Good grip due to the solid and long wooden handle. The swivel brush part fits through NS 29/32 or larger or any non-tapered neck with a diameter 24 mm or larger. 360 mm length brush handle offers an easy touch of the bottoms of larger size flasks. -
Specially recommended for all applications which require intensive cleaning. Brush part consists of a mixture of natural hair and very soft bristles providing long lasting trouble free life cycle. Ergonomic handle offers the best grip option. Can also be used for cleaning larger surfaces such as benches, floor. -
These professional draining racks cover all the cleaning demands of a modern laboratory. Manufactured from water-resistant, sturdy polyresin thick plate for lifetime usage. The collecting tray at the bottom part collects the drained water and dispense with the help of a hose supplied as a standard to the rack. Supplied complete with wall mounting kit, draining hose and fixing the template. Draining racks are supplied with 16 small and 16 large pegs. For additional Pegs, Click here: Draining Pegs, Isolab -
These Pegs are designed for: Draining Racks, isolab Pegs are manufactured from ABS which is extremely resistant side effects. Pegs are supplied disassembled and can easily be inserted into the related compartments on the draining rack. If necessary, it can be disassembled in a few seconds and replaced another suitable hole. This feature enables easy cleaning option of the pegs and also offers the flexibility of placing different size glassware on the rack panel. Large size pegs: in triangular form to carry glassware wider than 15 mm neck diameter. Small size pegs: in round form suitable to carry glassware wider than 6 mm neck diameter. -
Shirt collar design visitors gown without a hood and without pockets. Closure is provided with snap fasteners. Featured with rubber fasteners at the wrist. For single use. Manufactured for visitors protection at laboratories. Slightly porous texture of the textile ight weight. Easy to wear. Soft and flexible texture offers full comfort during use. Universal cut for fitting all body sizes. -
Overall design protective suit with hood and without pockets. Closure is provided by a zipper. Featured with rubber fasteners at the wrist. For single use. Manufactured for employees and visitors protection at laboratories. Slightly porous texture of the textile guarantees air permeability and prevents sweating during use. Light weight. Easy to wear. Soft and flexible texture offers full comfort during use. -
Manufactured from high-density antistatic polyethylene, providing an ideal balance of protection, durability, and comfort. Offers chemical protection according to category III ( type 5 & 6 ). Also offers an excellent barrier against fine particles down to 1-micron size. Protective suit with the overall design perfectly suitable for cleanroom areas. Also practical use at pharmaceutical handling and many others. Guarantees air permeability and prevents sweating during use. Repels water-based liquids and aerosols. Optimised body fit provides excellent wearer comfort. Featured with hood compatible with filtering face masks. Featured with rubber fasteners at the wrist and around the face. Closure is provided by auto-lock zipper with flap for increased protection. Lightweight. Easy to wear. Flexible texture offers full comfort during use. -
A practical desk protector offering full protection of desks against spilled solutions. Quickly absorbs liquids and keep spills from spreading. Absorbs up to 750 ml/m2 Their thick protective layer eliminates the risk of glass breakage in case tilt over. Supplied as a roll of 50 meters length with 46 cm width. first layer: Thick and very absorbent paper layer soaks the spilled liquids and protects the laboratory desks. second layer: Flexible, water-proof polyethylene layer prevents the spilled liquid penetration to the laboratory desk. -
Due to their microfibre structure, they provide excellent absorption capacity. Consists of 8 layer highly absorbent fibers which altogether “imprisons” the liquids and never returns back. Quickly absorbs the spills of all kinds of liquids including water-based liquids, solvents, alcohols, acids and alkalis and stores them absorbed. Featured with cavities on the pad surface for quicker and more effective absorption. The absorbed liquid can be extracted to be used again or to be disposed of separately. -
Manufactured from nonallergic, very soft, comfortable to wear PU foam with excellent sound insulation. Unique design offers wearing comfort even when worn extended hours. Optimised bell shape guarantees perfect fit even to ears with smaller auditory canals with a simple insertion. Once used seals the ear channel without the risk of slipping out. Featured with a cord fixing two plugs each other reducing the risk of loss. Easy to store when not in use.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
