-
Manufactured by automated machines with consistent length and thickness Due to properties, borosilicate glass is highly recommended for over heated applications -
Manufactured from PTFE. The test tubes are excellent in chemical, mechanical and heat resistance. It can withstand temperature continuously at 250°C and 300° for short intervals. Suitable for foodstuff. -
Manufactured from neutral glass featured with a polypropylene screw cap. Hermetic caps guarantee absolute leak-proof closure. Specially recommended for tissue culture or other similar applications -
Manufactured from polystyrene (PS) with polyethylene (PE) Screw Cap. The tubes have a round bottom and are self-standing. The sterile tubes are available individually wrapped. The 25ml individual tubes have a self- adhesive label for marking. CE certified. -
060.04.001 Manufactured from high quality, corrosion resistant chromated steel for holding thermometers in the most secure way. Featured with a swivel bosshead which provides 360° swivel of the clamped object around their axis. Bosshead locking feature guarantees perfect position hold of the clamped objects. Fixing head featured with flexible springs offers easy insertion and extraction of the thermometers. Clamps can be opened and closed smoothly with a 30 mm grip diameter. -
Immersion length is measured from the bottom of 10/18 joint to lower end of mercury bulb. Accuracy is ±1°C. -
Thermotech™ Beakers, a Cowie Registered Design, feature a unique combination of pure PTFE body with a specially formulated stabilised PTFE Carbon base as a single moulding to give:- Totally inert pure PTFE inner surface
- Heatable to 280°C without distortion
- Improved heat transfer
-
Thin Wall Joint Sleeves are inserted between standard taper ground glass joints to eliminate the use of grease and prevent sticking. Sleeves have a wall thickness of about 0.05mm and will withstand low to medium vacuum. -
Electronic timer counts up to 19 hours, 59 minutes with a 4 digit display for extended hours. Also featured with countdown function. A clear bell ring signals at the end of the pre-set time. A large LCD screen with 32 x 12 mm dimensions provides easy reading option from relatively long distances. The folding stand at the back housing offers a convenient angle for easy reading. Also featured with a clip at the back side. -
Electronic timer counts up to 59 minutes, 59 seconds with a 4 digit display. Also featured with count-down function. A clear bell ring signals at the end of the pre-set time. A large LCD screen with 50 x 26 mm dimensions provides easy reading option from relatively long distances. The folding stand at the back housing offers a convenient angle for easy reading of the results. A clip at the back side of the watch enables easy wall mounting. -
Electronic timer counts down with selected intervals of 10 seconds / 1 minute / 5 minute and 10 minutes. A clear visual and audial signal flashes at the end of the selected time. The LCD screen with 30 x 80 mm dimensions provides easy reading option from relatively long distances. The folding stand at the back housing offers a convenient angle for easy reading. A clip at the back side of the watch enables easy wall mounting. Can be hanged on metal surfaces with the two magnets provided at the back. -
Mechanical timer counts up to 60 minutes with 1-minute resolution. No need for batteries. Just winding will be enough to start the time counting. A clear bell ring signals at the end of the pre-set time. Can be interrupted during work and reset any time. Can be used on bench top or also can be hanged to any smooth surface. -
Mechanical timer counts up to 60 minutes with 1 minute resolution. Does not require batteries. Just winding will be enough to start the counting. A clear bell ring signals at the end of the preset time. Can be interrupted during work and reset any time. -
Mechanical timer counts up to 60 minutes with 1-minute resolution. No need for batteries. Just winding will be enough to start the time counting. A clear bell ring signals at the end of the pre-set time. Can be interrupted during work and reset any time. Can be used on bench top or also can be hanged to any smooth surface. -
Mechanical timer counts up to 60 minutes with 1 minute resolution. Does not require batteries. Just winding will be enough to start the counting. A clear bell ring signals at the end of the preset time. Can be interrupted during work and reset any time. -
Mechanical timer counts up to 60 minutes with 1 minute resolution. A large screen with 150 mm diameter provides easy reading option from relatively long distances. Featured with a red marked area for remaining time for long distance observation. Can be used on bench top or also can be hanged to any smooth surface.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
