-
COWIE universal stirrer guides for use with standard taper ground glass joints can be used with PTFE shaft Stirrers and glass and metal shaft stirrers. Unique features of the design are a permanently loaded Composite PTFE/PEEK Seal and a Glass Ball-Bearing for rigidity and smoothness of operation. • Exceptional chemical resistance • Anti-Whip and reduced vibration • Vacuum (5mmHg) and pressure (3-5psi) performance • No shedding • Maximum recommended speeds; continuous 500rpm, intermittent 800rpm -
Manufactured from polypropylene. The large capacity rack is autoclavable at +121°C for 20 minutes. Can be used dry, wet, and in water baths as the rack will not float. The special design allows samples to be incubated at the same temperature. Can be used in freezers without deforming or going brittle, will not rot, rust, or deform. Stackable when empty. -
Manufactured from virgin cadmium-free Polypropylene. Compatible for Kartell, Gilson, Eppendorf, Socorex, Nichiryo, Biohit, Brand, Hamilton, Kartell, Multipet. The tips has high clarity and excellent water-repellent properties designed to keep sample retention within the tip to a minimum. The precise centering of the orifice at the end of the tip guarantees a reliable directionality of the sample when delivered. The tips delivers excellent results even if used with other micropipette brands available on the market. -
Manufactured from polypropylene. 60ml, Ø38 x 65mm, unsterilised. The none sterile cups comes with a blue screw cap, while the sterile cup have a red screw cap and are individually wrapped. CE certified. -
MAde of Polypropylene. 150 and 250ml PP urine cups with screw cup. Non sterile cups have a blue screw cap and are sold in multi packs. Sterile cups have a red screw cap and a sanitized marking area and are individually wrapped. -
Manufactured from UV grade PMMA. 12 x 12 x 45mm The cuvettes is used for spectrophotometry application in visible spectrum. Equipped with optically machined walls to ensure optimal transparency along the spectral field from 340 to 800nm (Optical PS), and from 280 - 800nm (UV grade PMMA). It is recommended for most of the common biological and biotechnological applications. -
Manufactured from borosilicate glass particularly suitable for analysis of microscopic residues, particle controls, and multipurpose filtration application. Thick wall, heavy base, and reinforced rim prevent breakage during washing and transportation. Suitable to be used with 47/50 mm diameter membrane filters. Supplied with filter funnel of 300 ml volume capacity, support base with a sintered disc, vacuum connection sidearm, connecting clamp and 1000 ml flask. -
Manufactured from Para Rubber, The hose with cloth impression surface is suitable for air, water, medium concentration acids, alkaline solutions, abrasive products, and oxygenized solvents, etc. The temperature limit -40°C to + 70°C -
With a serrated hose connection (10mm O.D.) at right hand side. Main tube is 22mm O.D. and the distance between valves is 100mm center to center. -
With a serrated hose connection (10mm, O.D.) at left hand side. Main tube is 22mm O.D. and the distance between valves is 100mm center to center. -
General purpose manifold with 2mm or 4mm Teflon stopcocks. Main tube is 22mm O.D. with serrated hose connection (10mm O.D.) at right side. Delivery ports have 10mm serrated hose connections. Distance between stopcocks is 75mm. -
General purpose manifold with 2mm or 4mm Teflon stopcocks. Main tube is 22mm O.D. with serrated hose connection(10mm O.D.) at both ends. Delivery ports have 10mm serrated hose connections. Distance between stopcocks is 75mm. -
General purpose manifold with 2mm or 4mm Teflon stopcocks. Main tube is 22mm O.D. with serrated hose connection (10mm O.D.) at left side. Deliveryports have 10mm serrated hose connections. Distance between stopcocks is 75mm. -
With joints for easy removal of condensate. Body length is measured below the joint. Connections at center tube is 10mm O.D. while side tube hose connection is 13mm. -
Trap is designed for large volume solvent removal by vacuum. With 45/50 joint. Connections at center tube is 12mm O.D. while side tube is 10mm. -
With joints for easy removal of condensate. Serrated hose connections for side tube have an O.D. of 13mm at the smallest serration and 16mm at the largest serration. Center tube hose connection is always 10mm for easy connection to manifold bank tubes which are also with 10mm hose connection.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
