-
Solid phase peptide synthesis vessels feature 2mm PTFE stopcocks and fritted supports for resin beads during operation. The 24/40 inner drip joint can be assembled with other standard ware. The vessel has a 8mm hose connection for vacuum and the stopcock has an 8mm O.D. sidearm for inert gas introduction. Vesserls are supplied with PTFE-faced siliconen lined Nylon Cap. -
Supplied with one holed compression cap, one Viton O-Ring and one Teflon-faced silicone rubber septum. For replacement caps, see RC112; F0r Viton O-Rings, See R014; for septa, see R1420. -
Vials can be used for storage and shipping of valuable or aggressive materials, and for small scale reactions at low pressure. Thick walled design with tapered inner. Suitable for use to a maximum of 8psi at room temperature. -
Dispensing pump made of PP operated by a unique lever-action stroke. Delivery of approximately 10 ounces (ab. 300ml) per stroke, with capability of 6 gallons per minute (ab. 22-23 litres/min). Will handle the most viscous materials (equivalent to SAE 90 oil) Spigot orientation of 360° allows versatility in dispensing. Complete with shank. -
Manufactured from optical PS. 12 x 12 x 45mm The cuvettes is used for spectrophotometry application in visible spectrum. Equipped with optically machined walls to ensure optimal transparency along the spectral field from 340 to 800nm (Optical PS), and from 280 - 800nm (UV grade PMMA). It is recommended for most of the common biological and biotechnological applications. -
Shirt collar design visitors gown without a hood and without pockets. Closure is provided with snap fasteners. Featured with rubber fasteners at the wrist. For single use. Manufactured for visitors protection at laboratories. Slightly porous texture of the textile ight weight. Easy to wear. Soft and flexible texture offers full comfort during use. Universal cut for fitting all body sizes. -
Viton O-ring compatible for solvent and chemical . -
Manufactured from polymethylpentene. These crystal clear volumetric flasks creates no meniscus so the final reading are easy and accurate to observe. The flasks has been calibrated gravimetrically at 20%, and the thick walls eliminates distortion. The thin neck allows a more precise measurement. Autoclavable to 170°C, chemically cleaner than glass and chemically non-absorbent. Stopper is included with the flask. Suitable for foodstuff. -
Manufactured from polymethylpentene. These crystal clear volumetric flasks creates no meniscus so the final reading are easy and accurate to observe. The flasks has been calibrated gravimetrically at 20%, and the thick walls eliminates distortion. The thin neck allows a more precise measurement. Autoclavable to 170°C, chemically cleaner than glass and chemically non-absorbant. Stopper is included with the flask. Suitable for foodstuff. -
Manufactured from PFA. The volumetric flask has a high chemical and temperature resistance of -250°C to +270°C. The flasks are supplied with standard DIN stoppers made of PFA. Individually calibrated ring mark according to DIN EN ISO 1042, Class "A" standard. -
Manufactured from polypropylene. The volumetric flasks create no meniscus so final readings are easy. They are calibrated gravimetrically at 20°C. Translucency of PP enhanced when in contact with liquids. The thick walls eliminate any distortion and the thin neck allows a more precise final reading. Autoclavable, chemically non-absorbent, and stopper is included with the flask. -
Manufactured from polymethylpentene (PMP). These crystal clear volumetric flasks creates no meniscus so the final reading are easy and accurate to observe. The flasks has been calibrated gravimetrically at 20%, and the thick walls eliminates distortion. The thin neck allows a more precise measurement. Autoclavable to 170°C, chemically cleaner than glass and chemically non-absorbant. Stopper is included with the flask. Suitable for foodstuff. -
Manufactured from neutral tubing according to ISO 648 and DIN 12687 & ISO 835 and DIN 12699 standards. Alternative 2 standards: DIN/ISO Class A & B Carefully formed and beveled tips ensure proper flow rate. Inscriptions and nominal values are printed with amber stain. Color coded ring marks at suction stem allows fast identification and sourcing. -
Wall Mounted Emergency Eye Wash, 304 Stainless Steel, suitable for indoor use. -
Wall Mounted Emergency Shower for Indoor use, made with 304 Stainless Steel. -
Manufactured from ABS for safe and convenient transportation up to 6 wash bottles. Although highly recommended for 500mL bottles can also carry 250mL bottles. Strong, light weight body construction and ergonomic handle offer both comfort and control Easily stackable due to tapered body form for reducing storage space.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
