-
With a serrated hose connection (10mm O.D.) at right hand side. Main tube is 22mm O.D. and the distance between valves is 100mm center to center. -
With a serrated hose connection (10mm, O.D.) at left hand side. Main tube is 22mm O.D. and the distance between valves is 100mm center to center. -
General purpose manifold with 2mm or 4mm Teflon stopcocks. Main tube is 22mm O.D. with serrated hose connection (10mm O.D.) at right side. Delivery ports have 10mm serrated hose connections. Distance between stopcocks is 75mm. -
General purpose manifold with 2mm or 4mm Teflon stopcocks. Main tube is 22mm O.D. with serrated hose connection(10mm O.D.) at both ends. Delivery ports have 10mm serrated hose connections. Distance between stopcocks is 75mm. -
General purpose manifold with 2mm or 4mm Teflon stopcocks. Main tube is 22mm O.D. with serrated hose connection (10mm O.D.) at left side. Deliveryports have 10mm serrated hose connections. Distance between stopcocks is 75mm. -
With joints for easy removal of condensate. Body length is measured below the joint. Connections at center tube is 10mm O.D. while side tube hose connection is 13mm. -
Trap is designed for large volume solvent removal by vacuum. With 45/50 joint. Connections at center tube is 12mm O.D. while side tube is 10mm. -
With joints for easy removal of condensate. Serrated hose connections for side tube have an O.D. of 13mm at the smallest serration and 16mm at the largest serration. Center tube hose connection is always 10mm for easy connection to manifold bank tubes which are also with 10mm hose connection. -
For use with vacuum manifolds having 35/20 socket joints. Please order the pump adapter and socket clamp separately. -
Dewar style trap condenser designed for large volume solvent removal. Choice either stopcock for better vacuum PTFE stopcock for grease-free operation. With 10mm hose connections. -
Small scale dry ice, Deward style trap. The dry-ice chamber is 40mm I.D. x 60mm in length.For grease-free operation, you may choose PTFE(Teflon) stopcock type. -
Manufactured from polypropylene. Ø62, 118mm height, max pipette cap 25ml. The pipetting device is easy to use and able to draw up and measure any liquid (including most viscous liquid) Vadosa fits every type and size of pipette from 0.1 to 25ml and will delivery smallest quantities with precision and speed. It requires only one hand to operate the device. -
FeaturesA wide range of measurement and control, 1-1,000mbar.Two control modes of single-point control and programmed control available for choice as needed.Can store up to 5 programs, each containing up to 5 segments of programming control.A large-size TFT touch screen display control allows easy operation.All parts in contact with vapor or liquid are made of PTFE, ceramics or other high-performance materials and can effectively resist corrosion caused by organic solvents, water, acid and alkali.A built-in vent valve can feed inert gas into system equipment.One-stroke decompression allows easy installation and dismantling of vacuum system.Can be connected with pump power control for temporary shutdown of pump power supply after reaching stable degree of vacuum for energy conservation and environmental protection. Can also be operated in the normally open statue of pump. -
Solid phase peptide synthesis vessels feature 2mm PTFE stopcocks and fritted supports for resin beads during operation. The 24/40 inner drip joint can be assembled with other standard ware. The vessel has a 8mm hose connection for vacuum and the stopcock has an 8mm O.D. sidearm for inert gas introduction. Vesserls are supplied with PTFE-faced siliconen lined Nylon Cap. -
Supplied with one holed compression cap, one Viton O-Ring and one Teflon-faced silicone rubber septum. For replacement caps, see RC112; F0r Viton O-Rings, See R014; for septa, see R1420. -
Vials can be used for storage and shipping of valuable or aggressive materials, and for small scale reactions at low pressure. Thick walled design with tapered inner. Suitable for use to a maximum of 8psi at room temperature.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
