| Pipettes | Burettes |
| 1x217 | 1x215 |
| 2x219 | 2x219 |
| 1x218 | 2x1219 |
| 1x218 |
-
Manufactured from polyethylene/polypropylene. The automatic rinsing set solves the problem of washing pipettes up to 600mm long and Mohr burettes quickly and safely. The PE rinser fills via the spray nozzle that is situated at the top rim, which will prevent back-siphoning.The contaminated water will be siphon out once the siphon point at the top of the rinder has been reached. The pipettes/burettes are housed in a specially designed basket which minimizes breakages as it buffers the tips of pipettes against the soft PE base. two or three basket of pipettes/burettes can be soaking in their jars whilst another basket full is being washed in the rinser. Suggested basic set: -
Manufactured from polystyrene for easy organization of all kind of pipettes with 285 x 215 x 40mm dimensions. Cranated design enables safe holding of large size pipettes in longitudinal direction and short size pipettes in transverse direction. Can also be used in drawers as well as on bench tops. -
Manufactured from polyvinyl chloride. 216 x 283 x 40mm height. The tray can accomodate 7 pipettes with overall stem diameter not exceeding 20mm longitudinally, or 16 pipettes with stem diameter not exceeding 10mm laterally. Very useful workstation holder not only for pipettes. -
Made of PVC. Designed to hold about 30 pipettes. It has 4 compartments to accommodate pipettes of 1-2-5-10 mL capacities. -
Manufactured from polypropylene. The stand can accommodate 18 pipettes with diameter not exceeding 10mm, plus 10 pipettes with diameters not exceeding 15mm. Small holes at the base allows drainage. holder can be adjusted 8-14mm. Use the custom designed dished base unit with PVC rod (Art.262) to complete the system. -
Manufactured from polypropylene. 200 x 75 x 150mm height. The stand can accomodate 8 pipettes with diameters not exceeding 10mm, plus 8 pipettes with diameters not exceeding 15mm. Small holes in the base allow drainage. -
Manufactured from polypropylene for holding up to 94 pipettes vertically. The round carousel stand can rotate 360° around stand axis enabling easy reach to each pipette. The grid patterned upper disc which is concentric with the carrier plate keeps the pipettes in vertical and correct position. The carrier plate consists of four concentric troughs with tapered sides and open bottoms which cradle the pipette tips protectively. Drained liquid is collected by a stationary rack at the bottom part. Stability is guaranteed by 48 cm total height and 23 cm base diameter. -
Manufactured from acrylic for easy organization of all kinds of pipettes. 4 shelves guarantee easy and fast reach of all pipettes between 1 ml to 50 ml size with in arm's reach. Angled design of the pipette shelves prevents the risk of pipettes falling out even if the shelf is fully filled. Featured with magnetic clamps on both sides for arrangement of multiple box assembly. -
Manufactured from polypropylene. The suction and dispensing of the pump is achieved by rotating the wheel. A pressure lever ensures that all liquid are evacuated. -
Manufactured from polypropylene. Ø82, 426mm height. The versatile Jar is suitable for storing pipettes. The pipettes will be cushioned by the PP so there is reduced chances of having a chipped end pipettes. The jar can be autoclaved at 120°C for 20 minutes (The PE cap cannot be autoclaved). The welded flanged base gives an excellent stability and the tight fitting cover protects the pipeetes during transportation from dust, etc. Jar can be easily cut down to suit shorter length pipettes and can be canted on side for drainage. -
Advance yet easily controllable pipette filler for graduated and volumetric pipettes from 1ml to 100 ml volume range. Even inexperienced users can adjust the meniscus precisely. The optimized value system allows easy draw of liquid without excess pressure. Easy to use; before attaching the pipette first squeeze the silicone bulb and release the air inside. Attach the pipette Move the pipetting knob upward for filling, downward for discharging. For blow-out just push the discharge bellow. Ergonomic body design perfectly fits to any hand form and offers both left or right handers an easy operation. Pipette stem smoothly fits to the flexible silicone chuck and are firmly held in place. Replaceable hydrophobic membrane filter in the intake cone prevents cross contamination and stops the penetration of impurities. -
Bulb manufactured from natural rubber. Most common pipette filler for all types of pipette up to 10ml volume. Evacuation can be easily done by pressing the related automatic valves. Offer an easy single hand use. By pressing the valve, the liquid is drawn up to the desired level, dispensed partially or blown out. -
Kartell Art. 198 Manufactured from Yellow ABS, HDPE and PA6. Ø40mm, 100mm height, max cap pipettes 10ml. Comfortable grip. Simply press plunger and release to fill pipette. The knurl cap is for adjusting the plunger stroke for repeating preset volume. With the Rubber chuck, the pipette will be held in a moer secured and safe manner. The filler can handle pipettes up to 10ml. -
Kartell Art. 200 Manufactured with Red Rubber. The moulded rubber bulb with three glass ball valves which can be controlled by finger pressure. The filler can be used with all liquids except for those that are corrosive to rubber. Can be used on bulb or cylindrical pipettes of different capacity. comes complete with adapter for pipettes with capacities more than 20ml. -
Simple and easily controllable pipette filler for all pipettes up to 15ml volume. Featured with a white polypropylene attachment containing a silicone conical adapter that gently seals the pipette without twisting and reducing breakage. Very easy to use; Before attaching the pipette first squeeze the bulb and release the air inside. Then attach the pipette. Slowly release the bulb pressure and fill the pipette. For discharge, squeeze the bulb again. -
Manufactured from natural rubber. Ideal for simple pipetting applications. Offered with three different volume capacity. Very easy to use; Before attaching the pipette, first squeeze the bulb and release the air inside. Then attach the pipette. Slowly release the bulb pressure and fill the pipette. For discharge, squeeze the bulb again.
