-
Manufactured from polymethylpentene. These crystal clear volumetric flasks creates no meniscus so the final reading are easy and accurate to observe. The flasks has been calibrated gravimetrically at 20%, and the thick walls eliminates distortion. The thin neck allows a more precise measurement. Autoclavable to 170°C, chemically cleaner than glass and chemically non-absorbant. Stopper is included with the flask. Suitable for foodstuff. -
Manufactured from polymethylpentene. These crystal clear volumetric flasks creates no meniscus so the final reading are easy and accurate to observe. The flasks has been calibrated gravimetrically at 20%, and the thick walls eliminates distortion. The thin neck allows a more precise measurement. Autoclavable to 170°C, chemically cleaner than glass and chemically non-absorbent. Stopper is included with the flask. Suitable for foodstuff. -
Viton O-ring compatible for solvent and chemical . -
Shirt collar design visitors gown without a hood and without pockets. Closure is provided with snap fasteners. Featured with rubber fasteners at the wrist. For single use. Manufactured for visitors protection at laboratories. Slightly porous texture of the textile ight weight. Easy to wear. Soft and flexible texture offers full comfort during use. Universal cut for fitting all body sizes. -
Manufactured from optical PS. 12 x 12 x 45mm The cuvettes is used for spectrophotometry application in visible spectrum. Equipped with optically machined walls to ensure optimal transparency along the spectral field from 340 to 800nm (Optical PS), and from 280 - 800nm (UV grade PMMA). It is recommended for most of the common biological and biotechnological applications. -
Dispensing pump made of PP operated by a unique lever-action stroke. Delivery of approximately 10 ounces (ab. 300ml) per stroke, with capability of 6 gallons per minute (ab. 22-23 litres/min). Will handle the most viscous materials (equivalent to SAE 90 oil) Spigot orientation of 360° allows versatility in dispensing. Complete with shank. -
Vials can be used for storage and shipping of valuable or aggressive materials, and for small scale reactions at low pressure. Thick walled design with tapered inner. Suitable for use to a maximum of 8psi at room temperature. -
Supplied with one holed compression cap, one Viton O-Ring and one Teflon-faced silicone rubber septum. For replacement caps, see RC112; F0r Viton O-Rings, See R014; for septa, see R1420. -
Solid phase peptide synthesis vessels feature 2mm PTFE stopcocks and fritted supports for resin beads during operation. The 24/40 inner drip joint can be assembled with other standard ware. The vessel has a 8mm hose connection for vacuum and the stopcock has an 8mm O.D. sidearm for inert gas introduction. Vesserls are supplied with PTFE-faced siliconen lined Nylon Cap. -
FeaturesA wide range of measurement and control, 1-1,000mbar.Two control modes of single-point control and programmed control available for choice as needed.Can store up to 5 programs, each containing up to 5 segments of programming control.A large-size TFT touch screen display control allows easy operation.All parts in contact with vapor or liquid are made of PTFE, ceramics or other high-performance materials and can effectively resist corrosion caused by organic solvents, water, acid and alkali.A built-in vent valve can feed inert gas into system equipment.One-stroke decompression allows easy installation and dismantling of vacuum system.Can be connected with pump power control for temporary shutdown of pump power supply after reaching stable degree of vacuum for energy conservation and environmental protection. Can also be operated in the normally open statue of pump. -
Manufactured from polypropylene. Ø62, 118mm height, max pipette cap 25ml. The pipetting device is easy to use and able to draw up and measure any liquid (including most viscous liquid) Vadosa fits every type and size of pipette from 0.1 to 25ml and will delivery smallest quantities with precision and speed. It requires only one hand to operate the device. -
Small scale dry ice, Deward style trap. The dry-ice chamber is 40mm I.D. x 60mm in length.For grease-free operation, you may choose PTFE(Teflon) stopcock type. -
Dewar style trap condenser designed for large volume solvent removal. Choice either stopcock for better vacuum PTFE stopcock for grease-free operation. With 10mm hose connections. -
For use with vacuum manifolds having 35/20 socket joints. Please order the pump adapter and socket clamp separately. -
With joints for easy removal of condensate. Serrated hose connections for side tube have an O.D. of 13mm at the smallest serration and 16mm at the largest serration. Center tube hose connection is always 10mm for easy connection to manifold bank tubes which are also with 10mm hose connection. -
Trap is designed for large volume solvent removal by vacuum. With 45/50 joint. Connections at center tube is 12mm O.D. while side tube is 10mm.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
