-
Measurements: Bottom diameter x top diameter x height. Manufactured from chemically inert, autoclavable, best quality natural silicone according to DIN 12871 standard with durometer 50 A. Guarantees excellent chemical and temperature resistance between -60°C to +170°C. -
Teflon handler stoppers for easy griping. -
Teflon handle stopper for easy griping. -
Manufactured from polyethylene. The stopper comes in a neutral color and is used for disposable test tubes that has diameter of 11 or 16mm. CE certified. -
Manufactured from additive-free autoclavable, air permeable, actively breathing best quality cellulose. Provide excellent sealing for microbiological samples in tissue culture tubes, flasks etc. Also offers multiple advantages such as economical price, labour and time-saving applications and perfectly tight fitting. -
Manufactured from additive free, best quality natural rubber according to DIN 12871 standard with durometer 40 A. Guarantees excellent chemical and temperature resistance between -25°C to +70°C. The drilled hole offers labour and time-saving applications. -
Measurements: Bottom diameter x top diameter x height. Manufactured from additive free, best quality natural rubber according to DIN 12871 standard with durometer 40 A. Guarantees excellent chemical and temperature resistance between -25°C to +70°C. -
Manufactured from chemically inert, autoclavable, best quality natural silicone. Guarantees excellent chemical and temperature resistance between -60°C to +170°C. They provide perfect tight sealing even with poorly finished rims preventing accidental openings. Offers optional sealing both from inside or outside of the tube wall. For sampling, the upper septum can be easily punctured. Flexible body material, resealable. -
Electronic stopwatch offers to count up to 59 minutes, 59 seconds with 0,01-second resolution. Offers long life cycle and easy use with its water resistant sturdy plastic housing and lightweight. -
This classical stopwatch with a mechanical winding system can be used even in extreme conditions. Provides time counting up to 30 minutes with 0,2-second resolution. Chrome plated sturdy housing provides resistance to sudden impacts and guarantees a long life cycle. -
Storage Box only; can take up to 4 staining racks. Art 1100, for a total quantity of 100 slides. -
Manufactured from polypropylene. CE certified. For full specification, please refer to the table below. -
PTFE straight through bayonet valve. Max pressure 1 bar Vacuum 5 mmHg Note: Rapid changes in temperature over a range of 25°C may cause these valves to leak due to the expansion properties of PTFE. Can be sterilized at 135°C -
Connectors with bayonet fittings are for use with flexible tubing in PTFE, VITON, Silicone rubber or similar materials. Connectors are pure PTFE and may be sterilised at 135°C. -
PTFE straight through bayonet valve. Max pressure 1 bar Vacuum 5 mmHg Note: Rapid changes in temperature over a range of 25°C may cause these valves to leak due to the expansion properties of PTFE. Can be sterilized at 135°C. -
Pure PTFE Body with Medium vacuum pressure performance, unbreakable, inert and grease free. Supplied with borosilicate glass sidearms. -
Diluted strong inorganic acid, 50 % w/w, 25 L drum; also known as sulfuric acid; CAS 7664-93-9 -
Manufactured from PTFE. Specially designed to connect misaligned glass tubes. The connector are chemically inert, and Taper conforms to DIN 12242 standard. Suitable for foodstuff. -
Manufactured from borosilicate . The Snyder Distillation Column is part of a set for Kuderna-Danish evaporation setup. -
Long needle for solvent retrieval. -
SEPARA Syringeless filter is one step sample preparation device that integrates a device auto-sampler, filtration, membrane, plug and cap/septa. The device consists of two parts: an internal vial with a membrane chamber and an external vial to be filled with the filtrate. The internal vial has a sealed membrane and a cap with pre-cut septa. The liquid is placed in the external vial and the SEPARA is ready to be loaded in the auto-sampler. -
PTFE straight through bayonet valve. Max pressure 1 bar Vacuum 5 mmHg Note: Rapid changes in temperature over a range of 25°C may cause these valves to leak due to the expansion properties of PTFE. Can be sterilized at 135°C. -
PTFE straight through bayonet valve. Max pressure 1 bar Vacuum 5 mmHg Note: Rapid changes in temperature over a range of 25°C may cause these valves to leak due to the expansion properties of PTFE. Can be sterilized at 135°C. -
Pure PTFE Body with Medium vacuum pressure performance, unbreakable, inert and grease free. Supplied with borosilicate glass sidearms. -
Manufactured from HDPE. The tank, sized 10L and 20L, are specifically designed to rationalize laboratory with small production line organization. Giving the opportunity to optimize water, aqueous solutions and solvents availability in a reduced space. The spigot is placed in a position where the tank is allowed to stand even on a flat surface. The tanks are recommended for packaging and transporting liquids as well. Suitable for foodstuff. -
Over all dimensions: 155 x 250 x 100mm Cutting platform dimensions 155 x 110mm. Suitable for holding and releasing the tape to be cut to users desire. The core perfectly fits to the inner diameterr of the tape and keep the tape rigidly. Platform includes a writing surface, Finger holes on the platform enables quick release of the tape and accelerates the cutting step. Featured with a cut-off edge for efficient cutting of the the tape. A weighted base with non-skid pads prevent sliding or lifting. -
Tapered Stirrer Bars are an effective stirrer with action similar to Oval/Pivot Ring type stirrer bars. -
Manufactured from PTFE. With The stoppers has excellent chemical and temperature resistance. It is self lubricating. Standard taper: 1:10. According to DIN standard 12242. Suitable for foodstuff. -
Manufactured from coloured paper with special resin adhesive that resists to moisture and most solvents. Can be used between -5°C to + 110°C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces and peels off without leaving any sticky residue. Accepts writing from almost all pen types such as pencil, ballpoint pen, solvent ink marker etc. Markings remain absolutely legible under the most demanding laboratory conditions. Supplied as white colour or as “rainbow pack” pack of 6 different colours matching the universal hazard colour codes. -
FeaturesReliable heating/cooling elements and precise temperature control.Unique design of block ensures the temperature uniformity and repeatable results.High performance DSP and temperature control.Fast heating and cooling rate.Large user program storage. -
FeaturesReliable heating/cooling elements and precise temperature control.Unique design of block ensures the temperature uniformity and repeatable results.7 inch Large color touch panel screen for easy programming with user friendly software.High performance DSP and temperature control.Fast heating and cooling rate.Large user program storage.
-
Manufactured from polystyrene. The Sample Cup for Technicon, Beckman and Konelab Analyzers. Some models an optional push-in stopper is available (Art.2514). CE certified. Technicon: T - Beckman : B - Konelab: K -
Manufactured from polyethylene. The caps can fit either plastic or glass test tubes. -
079.11.016 For 15 - 16mm tubes, up to 50 slots (5 x 10). Manufactured from modified ABS which enables the rack to be used in water baths without floating Offers a very long life cycle due to the very robust construction Bottom of each tube compartment is featured with a silicone grip that firmly holds the tubes in positioning to prevent displacement Tubes can be inserted and extracted with a gentle push or pull Racks are supplied already assembled and cannot be disambled -
Manufactured from high quality chemical and corrosion resistant AISI 304 grade stainless steel. Robust and seamless construction guarantees long life cycle Smooth polished surface provides fast and easy cleaning Offers a very long life cycle due to the very robust construction Perfect design of the tube holes firmly keeps the tubes at their position. -
Manufactured from polypropylene. The rack is specifically designed for titration work. The test tube are held in position by the upstand support. All the contents of the test tubes are visible all the time. Can withstand temperature up to 120°C and can be used in water baths. -
Manufactured from PMMA. The sturdy test tube racks have smaller holes in the lower tier of the rack hold the test tubes safely. -
Manufactured from polypropylene. The lightweight, unbreakable traditional pattern test tube rack is autoclavable and can withstand temperature up to 120°C. -
Manufactured from expanded PS. The tray is very useful for large quantities and with holes deep enough to keep the test tubes. Art. 1175 will take Eppendorf tubes type Art.298. -
Manufactured from polypropylene. The test tube is equipped with a quick closure screw cap (PE). It is leak-proof and suitable for centrifugation. The design of the cap avoids any contamination due to drops of liquid on the inner surface. The strerile packing (Art. 88304) is supplied with the screw cap fitted on the test tube. Available in :blue (04) - red (10) - yellow (06) - white (03). -
Manufactured by automated machines with consistent length and thickness Due to properties, borosilicate glass is highly recommended for over heated applications -
Manufactured from PTFE. The test tubes are excellent in chemical, mechanical and heat resistance. It can withstand temperature continuously at 250°C and 300° for short intervals. Suitable for foodstuff. -
Manufactured from neutral glass featured with a polypropylene screw cap. Hermetic caps guarantee absolute leak-proof closure. Specially recommended for tissue culture or other similar applications -
Manufactured from polystyrene (PS) with polyethylene (PE) Screw Cap. The tubes have a round bottom and are self-standing. The sterile tubes are available individually wrapped. The 25ml individual tubes have a self- adhesive label for marking. CE certified. -
060.04.001 Manufactured from high quality, corrosion resistant chromated steel for holding thermometers in the most secure way. Featured with a swivel bosshead which provides 360° swivel of the clamped object around their axis. Bosshead locking feature guarantees perfect position hold of the clamped objects. Fixing head featured with flexible springs offers easy insertion and extraction of the thermometers. Clamps can be opened and closed smoothly with a 30 mm grip diameter. -
Immersion length is measured from the bottom of 10/18 joint to lower end of mercury bulb. Accuracy is ±1°C. -
Thermotech™ Beakers, a Cowie Registered Design, feature a unique combination of pure PTFE body with a specially formulated stabilised PTFE Carbon base as a single moulding to give:- Totally inert pure PTFE inner surface
- Heatable to 280°C without distortion
- Improved heat transfer
-
Thin Wall Joint Sleeves are inserted between standard taper ground glass joints to eliminate the use of grease and prevent sticking. Sleeves have a wall thickness of about 0.05mm and will withstand low to medium vacuum.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
