-
Manufactured from borosilicate tubing. Y-shaped connector provides safer connections as the ends have constrictions to hold rubber tubing securely. -
Manufactured from borosilicate tubing. T-shaped connector provides safer connections as the ends have constrictions to hold rubber tubing securely. -
Supplied with high vacuum valve with PTFE O-ring at tip. -
Supplied with high vacuum valve with PTFE O-ring at tip and PTFE wiper ("umbrella") to protect Viton O-ring on shaft. -
Manufactured with a stainless steel clamp and HIPS pressure plate for reliable and precise flow control of liquids and gases. Can be used wherever the flow rates at tubing with liquids and gases need to be regulated or stopped The clamp can be opened and closed at any position without tiresome scewing -
Manufactured from chrome plated steel for reliable and precise flow control of liquids and gases. Can be used wherever the flow rates at tubings with liquids and gases need to be regulated or stopped. The swing-open hinged bottom bar enables a fine and step-less adjusted flow control. Variably adjustable up to the total closure of the tubing. The unique construction enables easy mount of the clamp even when the tubing is already connected to a system. -
Manufactured from chrome steel according to DIN 3017 standard. Ideal clamps for safe fastening and securing tubings on pipe systems or to stopcocks. -
Kartell 1759 90 x 165mm Manufactured from green ABS. the tubing selector gives nominal OD and ID of tubes/hoses. Additionally used to determine 'grip' for connector. The selector includes following gauges: ID's mm 1 / 2 / 2.5 / 3 / 4 / 4.5 / 5 / 6 / 7 / 8 / 9.5 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 25. OD’S mm 1.5 / 2 / 2.5 / 3 / 4 / 5.5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 21. -
Manufactured from natural silicone with standard thickness of durometer 45A. Guarantees excellent chemical and temperature resistance between -60°C to +170°C. -
Manufactured from natural rubber with a standard thickness of durometer 45 A. Guarantees excellent chemical and temperature resistance between -25°C to +70°C. -
Manufactured from natural rubber with a standard thickness of durometer 45 A. Guarantees excellent chemical and temperature resistance between -25°C to +70°C. -
This strong, microporous film asymmetric membrane is constructed from a high-temperature polyethersulfone polymer that is acid and base resistant. Its strength and durability are advantageous during usage that involves aggressive handling or automated equipment. GVS PES Filtration Membrane is naturally hydrophilic without added wetting agents and has low extractables. Due to its inherent uniform porosity and controlled pore size, GVS PES Filtration Membrane efficiently removes particulates from solutions during general filtration. Additionally, its low protein and drug binding characteristics maximize recovery of critical drugs used in I.V. therapy, chemotherapy, and open-heart surgery. -
Based upon the solid experience in laboratory application, Looped Logic designs under fume hood cabinets with multiple models and functions. The toe-kick gives more utilization of undercounter space, and both sides are equipped with flame arrester vents. -
Manufactured from polypropylene. The connector inlet and outlet have different diameters. CE certified. For the full specification, please refer to the table below. -
Manufactured from virgin cadmium-free Polypropylene. Compatible for Kartell, Gilson, BRand, Nichiryo, Biohit, Socorex, Eppendorf, Hamilton. The tips has high clarity and excellent water-repellent properties designed to keep sample retention within the tip to a minimum. The precise centering of the orifice at the end of the tip guarantees a reliable directionality of the sample when delivered. The tips delivers excellent results even if used with other micropipette brands available on the market. -
Kartell Art. 208 Manufactured from synthetic rubber and silicon. The red rubber and silicon pipette bulb is for pipettes up to 25ml. -
COWIE universal stirrer guides for use with standard taper ground glass joints can be used with PTFE shaft Stirrers and glass and metal shaft stirrers. Unique features of the design are a permanently loaded Composite PTFE/PEEK Seal and a Glass Ball-Bearing for rigidity and smoothness of operation. • Exceptional chemical resistance • Anti-Whip and reduced vibration • Vacuum (5mmHg) and pressure (3-5psi) performance • No shedding • Maximum recommended speeds; continuous 500rpm, intermittent 800rpm -
Manufactured from polypropylene. The large capacity rack is autoclavable at +121°C for 20 minutes. Can be used dry, wet, and in water baths as the rack will not float. The special design allows samples to be incubated at the same temperature. Can be used in freezers without deforming or going brittle, will not rot, rust, or deform. Stackable when empty. -
Manufactured from virgin cadmium-free Polypropylene. Compatible for Kartell, Gilson, Eppendorf, Socorex, Nichiryo, Biohit, Brand, Hamilton, Kartell, Multipet. The tips has high clarity and excellent water-repellent properties designed to keep sample retention within the tip to a minimum. The precise centering of the orifice at the end of the tip guarantees a reliable directionality of the sample when delivered. The tips delivers excellent results even if used with other micropipette brands available on the market. -
Manufactured from polypropylene. 60ml, Ø38 x 65mm, unsterilised. The none sterile cups comes with a blue screw cap, while the sterile cup have a red screw cap and are individually wrapped. CE certified. -
MAde of Polypropylene. 150 and 250ml PP urine cups with screw cup. Non sterile cups have a blue screw cap and are sold in multi packs. Sterile cups have a red screw cap and a sanitized marking area and are individually wrapped. -
Manufactured from UV grade PMMA. 12 x 12 x 45mm The cuvettes is used for spectrophotometry application in visible spectrum. Equipped with optically machined walls to ensure optimal transparency along the spectral field from 340 to 800nm (Optical PS), and from 280 - 800nm (UV grade PMMA). It is recommended for most of the common biological and biotechnological applications. -
Manufactured from borosilicate glass particularly suitable for analysis of microscopic residues, particle controls, and multipurpose filtration application. Thick wall, heavy base, and reinforced rim prevent breakage during washing and transportation. Suitable to be used with 47/50 mm diameter membrane filters. Supplied with filter funnel of 300 ml volume capacity, support base with a sintered disc, vacuum connection sidearm, connecting clamp and 1000 ml flask. -
Manufactured from Para Rubber, The hose with cloth impression surface is suitable for air, water, medium concentration acids, alkaline solutions, abrasive products, and oxygenized solvents, etc. The temperature limit -40°C to + 70°C -
With a serrated hose connection (10mm O.D.) at right hand side. Main tube is 22mm O.D. and the distance between valves is 100mm center to center. -
With a serrated hose connection (10mm, O.D.) at left hand side. Main tube is 22mm O.D. and the distance between valves is 100mm center to center. -
General purpose manifold with 2mm or 4mm Teflon stopcocks. Main tube is 22mm O.D. with serrated hose connection (10mm O.D.) at right side. Delivery ports have 10mm serrated hose connections. Distance between stopcocks is 75mm. -
General purpose manifold with 2mm or 4mm Teflon stopcocks. Main tube is 22mm O.D. with serrated hose connection(10mm O.D.) at both ends. Delivery ports have 10mm serrated hose connections. Distance between stopcocks is 75mm. -
General purpose manifold with 2mm or 4mm Teflon stopcocks. Main tube is 22mm O.D. with serrated hose connection (10mm O.D.) at left side. Deliveryports have 10mm serrated hose connections. Distance between stopcocks is 75mm. -
With joints for easy removal of condensate. Body length is measured below the joint. Connections at center tube is 10mm O.D. while side tube hose connection is 13mm. -
Trap is designed for large volume solvent removal by vacuum. With 45/50 joint. Connections at center tube is 12mm O.D. while side tube is 10mm. -
With joints for easy removal of condensate. Serrated hose connections for side tube have an O.D. of 13mm at the smallest serration and 16mm at the largest serration. Center tube hose connection is always 10mm for easy connection to manifold bank tubes which are also with 10mm hose connection. -
For use with vacuum manifolds having 35/20 socket joints. Please order the pump adapter and socket clamp separately. -
Dewar style trap condenser designed for large volume solvent removal. Choice either stopcock for better vacuum PTFE stopcock for grease-free operation. With 10mm hose connections. -
Small scale dry ice, Deward style trap. The dry-ice chamber is 40mm I.D. x 60mm in length.For grease-free operation, you may choose PTFE(Teflon) stopcock type. -
Manufactured from polypropylene. Ø62, 118mm height, max pipette cap 25ml. The pipetting device is easy to use and able to draw up and measure any liquid (including most viscous liquid) Vadosa fits every type and size of pipette from 0.1 to 25ml and will delivery smallest quantities with precision and speed. It requires only one hand to operate the device. -
FeaturesA wide range of measurement and control, 1-1,000mbar.Two control modes of single-point control and programmed control available for choice as needed.Can store up to 5 programs, each containing up to 5 segments of programming control.A large-size TFT touch screen display control allows easy operation.All parts in contact with vapor or liquid are made of PTFE, ceramics or other high-performance materials and can effectively resist corrosion caused by organic solvents, water, acid and alkali.A built-in vent valve can feed inert gas into system equipment.One-stroke decompression allows easy installation and dismantling of vacuum system.Can be connected with pump power control for temporary shutdown of pump power supply after reaching stable degree of vacuum for energy conservation and environmental protection. Can also be operated in the normally open statue of pump. -
Solid phase peptide synthesis vessels feature 2mm PTFE stopcocks and fritted supports for resin beads during operation. The 24/40 inner drip joint can be assembled with other standard ware. The vessel has a 8mm hose connection for vacuum and the stopcock has an 8mm O.D. sidearm for inert gas introduction. Vesserls are supplied with PTFE-faced siliconen lined Nylon Cap. -
Supplied with one holed compression cap, one Viton O-Ring and one Teflon-faced silicone rubber septum. For replacement caps, see RC112; F0r Viton O-Rings, See R014; for septa, see R1420. -
Vials can be used for storage and shipping of valuable or aggressive materials, and for small scale reactions at low pressure. Thick walled design with tapered inner. Suitable for use to a maximum of 8psi at room temperature. -
Dispensing pump made of PP operated by a unique lever-action stroke. Delivery of approximately 10 ounces (ab. 300ml) per stroke, with capability of 6 gallons per minute (ab. 22-23 litres/min). Will handle the most viscous materials (equivalent to SAE 90 oil) Spigot orientation of 360° allows versatility in dispensing. Complete with shank. -
Manufactured from optical PS. 12 x 12 x 45mm The cuvettes is used for spectrophotometry application in visible spectrum. Equipped with optically machined walls to ensure optimal transparency along the spectral field from 340 to 800nm (Optical PS), and from 280 - 800nm (UV grade PMMA). It is recommended for most of the common biological and biotechnological applications. -
Shirt collar design visitors gown without a hood and without pockets. Closure is provided with snap fasteners. Featured with rubber fasteners at the wrist. For single use. Manufactured for visitors protection at laboratories. Slightly porous texture of the textile ight weight. Easy to wear. Soft and flexible texture offers full comfort during use. Universal cut for fitting all body sizes. -
Viton O-ring compatible for solvent and chemical . -
Manufactured from polymethylpentene. These crystal clear volumetric flasks creates no meniscus so the final reading are easy and accurate to observe. The flasks has been calibrated gravimetrically at 20%, and the thick walls eliminates distortion. The thin neck allows a more precise measurement. Autoclavable to 170°C, chemically cleaner than glass and chemically non-absorbent. Stopper is included with the flask. Suitable for foodstuff. -
Manufactured from polymethylpentene. These crystal clear volumetric flasks creates no meniscus so the final reading are easy and accurate to observe. The flasks has been calibrated gravimetrically at 20%, and the thick walls eliminates distortion. The thin neck allows a more precise measurement. Autoclavable to 170°C, chemically cleaner than glass and chemically non-absorbant. Stopper is included with the flask. Suitable for foodstuff. -
Manufactured from PFA. The volumetric flask has a high chemical and temperature resistance of -250°C to +270°C. The flasks are supplied with standard DIN stoppers made of PFA. Individually calibrated ring mark according to DIN EN ISO 1042, Class "A" standard. -
Manufactured from polypropylene. The volumetric flasks create no meniscus so final readings are easy. They are calibrated gravimetrically at 20°C. Translucency of PP enhanced when in contact with liquids. The thick walls eliminate any distortion and the thin neck allows a more precise final reading. Autoclavable, chemically non-absorbent, and stopper is included with the flask.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
