-
Manufactured from polypropylene. Graduated with cap, 1.5ml, for eppendorf. The ideal test tube for sample analysis. Depending on centrifuge being used, these tubes can withstand a centrifugal force of up to RCF 11,000. The flat cap with writing area. Art. 279 available in Neutral (00), blue (04), yellow (06), pink (13) and green (12). CE certified. -
Kartell Art. 298 Manufactured from Polypropylene. High transparency PP tube for easy sample checking. Flat cap with large frosted writing surface. The Liquid tight for centrifugation up to RCF 21000 x g. A large opening tab featuring rounded surfaces for smoother open/close routine and cap top with 3mm pierceable area. Autoclavable at 121°C for 20 minute with open cap. Available in: Neutral (00), Blue (04), Yellow (06), Pink (13) and green (12). Please mention the color you want in quotation. . -
Manufactured from polypropylene. Able to handle up 4000RPM, 3000RCF x g. The centrifuge tube can withstand temperature up to 120°C and is autoclavable. However, the tube cannot be used with naked flame. It has high chemical resistance and can be used as conventional test tubes as it has a good translucency. -
Consists of ceramic pipes around galvanized steel wire. -
Due to their microfibre structure, they provide excellent absorption capacity. Consists of 8 layer highly absorbent fibers which altogether “imprisons” the liquids and never returns back. Quickly absorbs the spills of all kinds of liquids including water-based liquids, solvents, alcohols, acids and alkalis and stores them absorbed. Featured with cavities on the pad surface for quicker and more effective absorption. The absorbed liquid can be extracted to be used again or to be disposed of separately. -
Features : ◆ High chemical resistant ◆ No air pollution, maintenance free ◆ Quiet and low vibration ◆ Thermal protection device Chemker series pump equipment are driven by Diaphragm without the need of lubricant, regular oil changes and maintenance; with no oil pollution. All wetted parts of Chemker series pump are made of PTFE material which can resist most of corrosive gases. Driven direct by motor with no additional belt-driven transmission; the quality vibration-proof assembly makes Chemker series run at the lowest noise level among all other equivalent pumps. Every motor of Chemker series pumps has a built-in thermal protection device to shut off the pump automatically when overheated and then resume working when the temperature cools down. -
Halogenated organic solvent, 2.5 L bottle; also known as trichloromethane; CAS 67-66-3 -
Deuterated NMR solvent, 100 mL bottle; also known as chloroform-d; CAS 865-49-6
-
General purpose column with a Teflon stopcock and a top outer joint. For flash chromatography. All Synthware columns are heavy wall designed to increase safety. -
Out of stock
General purpose column has a Teflon stopcock and a top outer joint. With a coarse porosity fritted disc to support column packing. The section below disc is carefully minimized to prevent re-mixing of components already separated. All Synthware columns are heavy wall designed to increase safety. -
Short Column with lower 24/40 joint and hose connection for vacuum. All Synthware columns are heavy wall designed to increase safety. -
Chromatography Reservoir for flash chromatography. -
045.04.001 Manufactured from high quality, corrosion resistant chromated steel holding for various objects in the most secure way Featured with a swivel bosshead which provides 360° swivel of the clamped object around their axis. Bosshead locking feature guarantees perfect position hold of the clamped objects. Adjustable clamps guarantee perfect pressure control PVC coated insulated jaws guarantee perfect heat insulation. Soft coating holds the glassware gently and prevent breakage Clamps can be opened and closed smoothly with a 50 mm grip diameter -
045.01.001 Manufactured from high quality, corrosion resistant chromated steel holding for various objects in the most secure way PVC coated insulated jaws guarantee perfect heat insulation Individually adjustable clamps guarantee perfect and precise control of holding pressure and holding position Clamps can be opened and closed smoothly with a 50 mm grip diameter -
045.06.001 Manufactured from high quality, corrosion resistant chromated steel holding for various objects in the most secure way. Featured with a swivel bosshead which provides 360° swivel of the clamped object around their axis. Bosshead locking feature guarantees perfect position hold of the clamped objects. Adjustable clamps guarantee perfect pressure control. PVC coated insulated jaws guarantee perfect heat insulation. Soft coating holds the glassware gently and prevent breakage. Clamps can be opened and closed smoothly with a 70 mm grip diameter. -
045.03.001 Manufactured from high quality, corrosion resistant chromated steel holding for various objects in the most secure way PVC coated insulated jaws guarantee perfect heat insulation. Soft and elastic coating holds the glassware gently and prevent possible breakage Individually adjustable clamps guarantee perfect and precise control of holding pressure and holding position Clamps can be opened and closed smoothly with a 70 mm grip diameter -
018.06.001 Manufactured from polypropylene to hold one straight burette Unique design guarantees firm hold of the burettes and offers an uninterrupted easy observation of volume graduations and meniscus level through all angle Clamp can be used on support rods of diameter 10mm to 12mm Fixing head featured with flexible springs offers easy insertion and extraction of the burette -
018.05.001 Manufactured from steel to hold one straight burette at a time. Unique design guarantees firm hold of the burettes and offers an uninterrupted easy observation of volume graduations and meniscus level through all angles. Clamps can be used on support rods of diameter 10 mm to 12 mm. Fixing head featured with flexible springs offers easy insertion and extraction of the burettes. -
018.06.002 Manufactured from polypropylene to hold two straight burettes at a time. Unique design guarantees firm hold of the burettes and offers an uninterrupted easy observation of volume graduations and meniscus level through all angles. Fixing head featured with flexible springs offers easy insertion and extraction of the burettes. Clamps can be used on support rods of diameter 10 mm to 12 mm. -
018.05.002 Manufactured from steel to hold two straight burettes at a time. Unique design guarantees firm hold of the burettes and offers an un-interrupted easy observation of volume graduations and meniscus level through all angles. Fixing head featured with flexible springs offer easy insertion and extraction of the burettes. Clamps can be used on support rods of diameter 10 to 12mm. -
046.07.001 Manufactured from high quality, corrosion resistant chromated steel. Ideal for frame works and fixing perpendiculars. Clamps can be opened and closed smoothly by a screw thread with a 12 mm grip diameter. -
Made of Stainless steel with a screw type locking nut. -
Manufactured Polyoxymethylene (POM). The plastic clamps are made for the safe connection of standard-finish glass conical joints. It is corrosion proof and will not scratch glasses. Available in various colors according to the dimension. Autoclavable. -
Manufactured from neutral tubing according to ISO 648 and DIN 12687 & ISO 835 and DIN 12699 standards. Alternative 2 standards:DIN/ISO Class A & B Carefully formed and beveled tips ensure proper flow rate Inscriptions and nominal values are printed with amber stain. Color coded ring marks at suction stem allows fast identification an sourcing -
Manufactured from heat resistant, durable borosilicate glass according to DIN EN ISO 4788 standard. Calibrated according to DIN/ISO Class "A" standard. Individual calibration carried out by automatic robots eliminate possible deviations from nominal values. Conformity mark and batch number printed on the body surface. Batch certificate can be downloaded from ISOLAB website. Inscriptions on the cylinder body are printed with blue enamel. Flawless spout design assures pouring without any drips. Hexagonal base with strengthened knobs ensures increased stability. -
Manufactured from heat resistant, durable borosilicate glass according to DIN EN ISO 4788 standard. Calibrated according to DIN/ISO Class "A" Standard Individual calibration carried out by automatic robots eliminate possible deviations from nominal values. Conformity mark and batch number printed on the body surface. Batch certificate can be downloaded from website. Inscriptions on the cylinder body are printed with blue enamel. Hexagonal base with strengthened knobs ensures increased stability. Supplied with a leak-proof P.E stopper -
Manufactured from heat resistant, durable borosilicate glass according to DIN EN ISO 1042 standard. Trapezoidal body form offers much higher stability and avoids fall over risk. Calibrated according to DIN/ISO Class "A" standard. Individual calibration carried out by automatic robots eliminate possible deviations from nominal values. Conformity mark and batch number printed on the body surface. Batch certificate can be downloaded from website. Diamond grinded meniscus ring mark offers longer persistance and enable easy observation of meniscus level. Inscriptions on the clear flask bodies are printed with white enamel. All volumetric flasks are supplied with a P.E leak-proof stopper. -
Manufactured from heat resistant, durable borosilicate glass according to DIN EN ISO 1042 standard. Trapezoidal body form offers much higher stability and avoids fall over risk. Calibrated according to DIN/ISO Class "A" standard. Individual calibration carried out by automatic robots eliminate possible deviations from nominal values. Conformity mark and batch number printed on the body surface. Batch certificate can be downloaded from website. Diamond grinded meniscus ring mark offers longer persistance and enable easy observation of meniscus level. Inscriptions on the clear flask bodies are printed with blue enamel. All volumetric flasks are supplied with a P.E leak-proof stopper. -
Manufactured from heat resistant borosilicate 3.3 glass according to DIN EN ISO 1042 Standard. Guaranteed excellent protection against UV source and still with good visibility of liquid level. Calibrated according to DIN/ISO Class "A" Standard. Individual calibration carried out by automatic robots eliminate possible deviations from nominal values. Conformity mark and batch number printed on the body surface. Batch Certificate can be downloaded from ISOLAB Website. Diamond grinded meniscus ring mark offers longer persistance. White colored meniscus ring mark enables easy observation of meniscus level. Inscriptions on the flask bodies are printed with white enamel color. Supplied with a leak-proof P.E Stopper -
Manufactured from heat resistant borosilicate 3.3 glass according to DIN EN ISO 1042 standard. Calibrated according to DIN/ISO Class "A" Standard. Individual calibration carried out by automatic robots eliminate possible deviations from nominal values. Conformity mark and batch number printed on the body surface. Batch certificate can be downloaded from ISOLAB Website. Diamond grinded meniscus ring mark offers longer persistance Blue colored meniscus ring mark enables easy observation of meniscus level. Inscriptions on the bodies are printed with blue enamel color Supplied with leak-proof P.E Stopper -
Manufactured from pre-vacuum calibrated borosilicate 3.3 tubing according to ISO 385 standards. Calibrated according to DIN/ISO Class "AS" standard. Individual calibration carried out by automatic robots eliminate possible deviation from nominal values Conformity mark and batch number printed on the body surface. Batch certificate can be downloaded from ISOLAB website. Supplied with an interchangeable PTFE stopcock which does not require greasing at all. Stopcock guarantees the best drop control. Identical keys meed no "matching the pairs" during cleaning. Inscriptions and nominal values on clear burettes are printed with blue enamel. Schellbach stripe featured with a narrow blue band which is at the center of the large white band offers easier and accurate observation of the meniscus line. -
Manufactured from pre-vacuum calibrated borosilicate 3.3 tubing according to ISO 385 standards. Calibrated according to DIN/ISO Class "AS" standard. Individual calibration carried out by automatic robots eliminate possible deviations from nominal values. Conformity mark and batch number printed on the body surface. Batch certificate can be downloaded from ISOLAB website. Supplied with an interchangeable PTFE stopcock which does not require greasing at all. Stopcock guarantees the best drop control. Identical keys need no "matching the pairs" during cleaning. Inscriptions and nominal values on amber burettes are printed with white enamel.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
