-
Made of PVC. Designed to hold about 30 pipettes. It has 4 compartments to accommodate pipettes of 1-2-5-10 mL capacities. -
Manufactured from polyvinyl chloride. 216 x 283 x 40mm height. The tray can accomodate 7 pipettes with overall stem diameter not exceeding 20mm longitudinally, or 16 pipettes with stem diameter not exceeding 10mm laterally. Very useful workstation holder not only for pipettes. -
Manufactured from polystyrene for easy organization of all kind of pipettes with 285 x 215 x 40mm dimensions. Cranated design enables safe holding of large size pipettes in longitudinal direction and short size pipettes in transverse direction. Can also be used in drawers as well as on bench tops. -
Manufactured from polyethylene/polypropylene. The automatic rinsing set solves the problem of washing pipettes up to 600mm long and Mohr burettes quickly and safely. The PE rinser fills via the spray nozzle that is situated at the top rim, which will prevent back-siphoning.The contaminated water will be siphon out once the siphon point at the top of the rinder has been reached. The pipettes/burettes are housed in a specially designed basket which minimizes breakages as it buffers the tips of pipettes against the soft PE base. two or three basket of pipettes/burettes can be soaking in their jars whilst another basket full is being washed in the rinser. Suggested basic set:Pipettes Burettes 1x217 1x215 2x219 2x219 1x218 2x1219 1x218 -
Manufactured from virgin polystyrene with excellent optical transperancy. Sterilized with gamma irradiation. Free of RNase, DNase, DNA and pyrogene. Smooth interior prevents cell-hanging and clumping inside the pipette wall. Pipette tip offers constant reproducible flow. Optimised mouthpiece perfectly fits to all types of pipette pumps and balls. Colour coded ring mark at suction stem allows fast identification and sourcing. The sharp, black, highly visible permanent graduations guarantee precise reading. -
Manufactured from polystyrene featured with thick walls and crush-resistant corners as single, disposable use. Offers a clean, practical, and economical alternative to all other re-usable pipetting reservoirs. Featured with a visible volume marking on the side wall. Large pour-backspouts at the corners guarantee pouring back the remaining liquid in to the original container without spillage. Easily stackable due to the tapered body form for reducing storage space -
Manufactured from ultra clear polypropylene according to ISO 7056 standard with thick walls preventing breakage. Resistant to most acids, bases and many commonly used solvents. Functional large spout minimizes possible spills during liquid transfer. Volume graduations and inscriptions are printed with blue enamel. Easily stack-able due to the tapered body form from reducing storage space. -
Manufactured from ultra clear polypropylene according to ISO 7056 standard with thick walls preventing breakage. Resistant to most acids, bases and many commonly used solvents. Functional large spout minimizes possible spills during liquid transfer. Volume graduations and inscriptions are made embossed scale form. Easily stack-able due to the tapered body form for reducing storage space. -
Manufactured from high quality, chemical and corrosion resistant AISI 304 grade stainless steel. Robust seamless construction guarantees a long life cycle. Highly polished interior enables much easier cleaning. Molded graduation on the side wall offer easy volume identification Functional large spout minimizes possible spillage during liquid transfer. -
A general-purpose stirrer with a smooth, round profile suitable for a wide variety of applications. Similar action to cylindrical but gives more turbulence at low speed. -
Manufactured from special formulated polypropylene with thick walls and crush-resistant corners. Featured with high transparency and chemical heat tolerance. Autoclavable at 121°C. Caps should not be closed during autoclaving. Angled neck form allows unrestricted liquid flow out without leaving any residue at the bottle neck. Large GL45 bottle neck provides easy filling and pouring. Cap with large ridges provide increased grip and featured with sel lock and internal security ring. Embossed volume graduations on wall side offers better liquid level viewing and reproducible filling of the bottle without the need of a measuring cylinder. Amber bottle are manufactured from special formulated polypropylene preventing UV light penetration into the flask yet still offering high transparency. Sterile bottles are manufactured at aseptically sterile production halls and then send to gamma sterilisation. -
Manufactured from special formulated polypropylene with thick walls and crush-resistant corners. High transparency and chemical heat tolerance. Impact resistant and autoclavable at 121°C, Caps should not be closed during autoclaving Angled neck form allows unrestricted liquid flow out without leaving any residue at bottle neck. Large GL45 bottle neck provide easy filling and pouring Cap with large ridges helps with increased grip featured with self lock and internal security ring. Embossed volume graduations on wall side offers better liquid level viewing and reproducible filling of the bottle without the need of a measuring cylinder. Clear bottles are manufactured from very clear polypropylene resulting with high transparency and for better view of the bottle content. Sterile bottles are manufactured at aseptically sterile production halls and then send to gamma sterilization. -
Alloys: Platinum dishes are available in the following alloys: – 100%Pt (platinum) – 95%Pt/5%Au (platinum/gold) – 97%Pt/3%Rh (platinum/rhodium) – 90%Pt/10%Rh (platinum/rhodium) – 90%Pt/10%Ir (platinum/iridium -
*Reinforcing of the rim gives the crucible a more robust character enabling regular handling and reducing rim deformation. Available Capacity: 2.5-700ml (larger sizes made to order). Options: Lids, reinforced rims and/or bases. Alloys: Platinum crucibles are available in the following alloys: – 100%Pt (platinum) – 95%Pt/5%Au (platinum/gold) – 97%Pt/3%Rh (platinum/rhodium) – 90%Pt/10%Rh (platinum/rhodium) – 90%Pt/10%Ir (platinum/iridium) -
Complete with control knob. Viton O-rings on PTFE shaft are protected with precision Teflon wipers. The plug has a machined-in integral PTFE tip O-ring to make the primary seal. This design provides for an excellent vacuum tight seal without exposing any material other than Teflon to chemicals. -
Made from polypropylene, the one-piece rod with flattened ends forming two small spatulas. -
GVS polypropylene membrane filters are composed of pure polypropylene with absolute pore size ratings. These filters offer broad chemical compatibility allowing its use with aqueous and organic solvent samples. The polypropylene filter has extremely low extractable levels designed to provide accurate, consistent analysis results for sensitive ion chromatography applications while prolonging column life. GVS polypropylene filter is the preferred filter membrane for HPLC applications where the detection levels are below 230 nm. The filters also exhibit negligible protein binding which, is essential for maximum sample recovery of critical, small volume protein samples. -
Membrane Material: Polyvinylidene Fluoride Membrane Diameter (mm): 25 and 47 Sterile: No| Sterilization: Autoclave (121 °C at 1 bar), Gamma, Beta, ETO Max operating temp (°C ): 85 General Application: Filtration of Aqueous and Organic Solutions Analytical Sample Prep, uHPLC Chromatography Clarification Protein Chemistry -
GVS PCTE Membrane is made from a thin, microporous polycarbonate film material. It is ideally suited for use in blood assays and high-purity and general filtration. Though polycarbonate is hydrophobic, the membrane is treated with a wetting agent to make it hydrophilic. Features and Benefits • Smooth, thin, glass-like surface: Planar surface makes it ideal for particle identification by microscopy • Superior strength: Tensile strength of 207 bar (> 3000 psi) maintains pore size and density, and will not stretch • Low extractables: Ensures tests will be clean promoting consistent results • Low protein binding • Negligible absorption/adsorption:Maximizes critical solution recovery -
Features and Benefits • High range of chemical compatibility: Resistant to a wide range of chemicals • Smooth, thin, glass-like surface: Captures all particles on the surface larger than the pore size • Precise pore size and density: Provides flow control for liquids moving through the membrane capturing 100 percent of cells larger than pore size • Low extractables: Ensures tests will be clean promoting consistent results • Low protein binding: Low binding prohibits absorption of cells being filtered • Negligible absorption/adsorption:Maximizes critical solution recovery -
Manufactured from polypropylene, the 60° angle autoclavable funnels has an excellent chemical resistance and can be use with liquids. The Large bore avoids bridging of powders during transfer with its ribbed outside to avoid pressure lock. -
GVS capsules are disposable filtration units designed for the removal of particles or bacteria from aqueous or solvent solutions and gas streams. They are ready to use, eliminating the need to disassemble, clean and reassemble filter housings. GVS capsules contain no glue or surfactants and feature serial layer filter design for increased throughput and extended life. Two upstream vents are included to facilitate venting in any position. All capsules containing membrane media are preflushed with purified water to reduce extractables. GVS capsules pass class VI toxicology testing and are integrity tested prior to shipment. Capsule filters are available in sterile and non-sterile versions. -
Looped Logic provides a full range of accessories although the cabinets are under standardized manufacture. Customized service is available to be adapted to different application. -
PPE Cabinet designed with two compartments for chemical protective clothing hung on aluminium alloy rails, and other PPE, etc. High quality hinges of easy maintenance and replacement. Excellent workmanship, with good corrosion resistance and durability. Equipped with a safety hammer, embedded at the up right front corner, easily acquired when needed. -
Heavy wall cylindrical vessels have an internal thread for use with a 15mm Teflon bushing as a pressure seal. This unique design allows hand tightening and loosing for easy access into the vessel. The O-ring is positioned on the bushing above the thread for improved sealing. The vessels are useful for pressure reactions and applications such as polymerization and analysis of halogens by thermal decomposition in the presence of lime. Complete apparatus is supplied with vessel, Teflon bushing and Viton O-ring. -
Heavy wall round bottom vessels have an internal thread for use with a 15mm Teflon bushing as a pressure seal. This unique design allows hand tightening and loosing for easy access into the vessel. The O-ring is positioned on the bushing above the thread for improved sealing. The vessels are useful for pressure reactions and applications such as polymerization and analysis of halogens by thermal decomposition in the presence of lime. Complete apparatus is supplied with vessel, Teflon bushing and Viton O-ring. -
Manufactured from natural rubber with a special design that keeps the funnel and filtering flask always in the center. These adapters also provide all-around protection reducing impact damages. Also, a clean seal is created between the flask rim and the funnel neck. -
Overall design protective suit with hood and without pockets. Closure is provided by a zipper. Featured with rubber fasteners at the wrist. For single use. Manufactured for employees and visitors protection at laboratories. Slightly porous texture of the textile guarantees air permeability and prevents sweating during use. Light weight. Easy to wear. Soft and flexible texture offers full comfort during use. -
Manufactured from high-density antistatic polyethylene, providing an ideal balance of protection, durability, and comfort. Offers chemical protection according to category III ( type 5 & 6 ). Also offers an excellent barrier against fine particles down to 1-micron size. Protective suit with the overall design perfectly suitable for cleanroom areas. Also practical use at pharmaceutical handling and many others. Guarantees air permeability and prevents sweating during use. Repels water-based liquids and aerosols. Optimised body fit provides excellent wearer comfort. Featured with hood compatible with filtering face masks. Featured with rubber fasteners at the wrist and around the face. Closure is provided by auto-lock zipper with flap for increased protection. Lightweight. Easy to wear. Flexible texture offers full comfort during use. -
Connectors with bayonet fittings are for use with flexible tubing in PTFE, VITON, Silicone rubber or similar materials. The connectors are pure PTFE and may be sterilized at 135°C -
Adjustable Rotors slide over standard shafts and lock in place to give the most effective stirring patterns. All PTFE with glass filled PTFE lock nut. Rotor diameters are nominal. -
Adjustable Rotors slide over standard shafts and lock in place to give the most effective stirring patterns. All PTFE with glass filled PTFE lock nut. Rotor diameter are nominal. -
Adjustable Rotors slide over standard shafts and lock in place to give the most effective stirring patterns. All PTFE with glass filled PTFE lock nut. Rotor diameter are nominal.
-
Shaft Stirrers have a unique, fully moulded construction featuring a PTFE rotor moulded to a fully PTFE encapsulated steel reinforced drive shaft. • Chemically Inert • Easy to clean • No cross contamination • Unbreakable • Non Scratch •Use up to Ca. 280°C •Exposed stainless steel core version (EX) for extra rigid clamping in drive chuck (exposed length 50 mm) -
Bottle Pourer permits direct pouring of all liquids from reagent bottles in a safe and consistent manner. Totally inert with PTFE encapsulated viton neck seal. To fit GL30, 32, 38 and 45 screw neck bottles. -
GVS capsules are disposable filtration units designed for the removal of particles or bacteria from aqueous or solvent solutions and gas streams. They are ready to use, eliminating the need to disassemble, clean and reassemble filter housings. GVS capsules contain no glue or surfactants and feature serial layer filter design for increased throughput and extended life. Two upstream vents are included to facilitate venting in any position. All capsules containing membrane media are preflushed with purified water to reduce extractables. GVS capsules pass class VI toxicology testing and are integrity tested prior to shipment. Capsule filters are available in sterile and non-sterile versions.
-
Test Tubes have a smooth internal finish and are usable to 280°C. Available with or without screw caps. -
Micro Stir Bar For use where identification is important. NOTE: Coloured PTFE coatings are not as inert as pure PTFE -
For use where identification is important. NOTE: Coloured PTFE coatings are not as inert as pure PTFE -
Crucibles have a super smooth internal finish, are chemically inert and usable to ca. 280°C. -
Evaporating Dishes are inert and usable to ca. 280°C with a smooth internal finish. -
Made from PTFE, The Tweezers are inert and non-contaminating. Comes in Sharp or Square ends. -
Flat Head Stoppers fit standard taper ground glass joints. Trapezoidal rings give high vacuum performance and reduce seizure. -
Manufactured from PTFE. The tubes has excellent resistance to acid, bases, and solvents.It is autoclavable with a Temperature limit up to 260°C. -
Joint Clamps are unaffected by all chemical reagents. Totally encapsulated steel spring maintains strength to 280°C. Adjust simply by compression-extension by hand. -
Micro Stirrer Bars are for the very smallest containers. Note: Always use the largest stirrer bar possible. -
Octahedral Stirrers Bars use a similar actions to Pivot Ring type but with increased turbulence at low speeds.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
