-
Heavy wall design. All sizes listed are hand-blown from tubing to ensure uniform wall thickness. -
With a threaded side port for insertion of thermometer or bleed tubes, having an O.D. between 5mm and 7.5mm. Heavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness. -
Round Bottom, four-neck flask with standard taper outer joints and a thermometer joints. Supplies complete with a compression cap and viton O-ring. For insertion of plan thermometers or bleed tubes having an O.D between 5.0-7.0mm. -
Out of stock
Heavy wall design. -
3 neck round bottom flask with lower outlet 4mm straight bore teflon stopcock. -
Heavy wall design. All sizes listed are hand blown from tubing to ensure uniform wall thickness. -
Heavy wall design. All sizes are hand-blown from tubing to ensure uniform wall thickness. -
Heavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness. -
Used for air sensitive chemistry. -
Supplied with high vacuum valve with PTFE O-ring at tip. -
Round bottom with joints. Heavy wall design. All sizes listed below are hand-blown from tubing to ensure uniform wall thickness. -
Round bottom with joints. Heavy wall design. All sizes listed below are hand blown from tubing to ensure uniform wall thickness. -
Round Bottom flasks with joints. Heavy wall design. All sizes listed are hand-blown from tubing to ensure uniform wall thickness. -
Pear shape flask with joints and 2 neck. Heavy wall design. -
Manufactured from heat resistant polypropylene for holding round bottom flasks. Unique wall design offers an excellent support at every point of contact. Easily stack-able due to the tapered body form for reducing storage space. -
Manufactured from heat resistant, durable borosilicate glass according to DIN 12392 standard. Thick wall, heavy base, and reinforced rim prevent breakage during washing and transportation. Perfectly ground NS necks with smooth interior guarantee excellent leak-proof closure. Inscriptions are printed with white enamel. -
Manufactured from heat resistant, durable borosilicate glass according to ISO 6556 standard. Featured with glass side arms fitting 6-10 mm bore size tubings. Thick wall, heavy base, and reinforced rim prevent breakage during washing and transportation. Volume graduations and inscriptions are printed with white enamel. -
Manufactured from heat resistant, durable borosilicate glass according to ISO 6556 standard. Featured with GL 14 screw thread polypropylene side arms fitting 6-10 mm bore size tubings. Side arms can be easily connected or disconnected to the main body preventing accidental breakage. Other technical specifications are the same as glass side arm filter flasks. -
Manufactured from heat resistant, durable borosilicate glass according to DIN and ISO standards. Featured with a 25° angle PTFE stopcock. Thick wall, heavy base, and reinforced rim prevent breakage during washing and transportation. Perfectly ground NS necks with smooth interior guarantee excellent leak-proof closure. Volume graduations and inscriptions are printed with white enamel. -
Evaporating dishes may be ordered also with reinforced rim and heavy base. The additional cost for reinforcement is far outweighed by longer life and ease of handling. If covers are required, please specify. -
Manufactured from heat resistant, durable borosilicate glass according to ISO 1773 standard. Thick wall, heavy base and reinforced rim prevent breakage during washing and transportation. Inscriptions are printed with white enamel. -
FeaturesA wide range of speed from 15 to 1500rpm.Automatic reverse rotation for excellent mixing.Protection class (IP65).PET top provides excellent chemical resistance.Ultra silence and vibration-free. -
102 x 14 x 67h (mm) Connect OD 6.5-10mm Manufactured from SAN . For liquid flow from 50ml/min. in horizontal position, and 140ml/min. in vertical position. Minimum air flow 3L/min horizontal and 8L/min. vertical. The flow indicator is not to be used with corrosive fluids or over +50°C. -
Manufactured from PMP for precise optical indication of the flow. Can resist max 2 bar pressure. Can be used with tubings of 6 to 11 mm internal diameter. For optimum performance, the minimum flow rate of 50 ml/ minute (vertically) and 140 ml/minute (horizontally) is required. Functions in both directions and can be mounted with any angle. -
Kartell 539 90 x 15 x 40h (mm), connect OD 6-11mm. Manufactured from SAN. For liquid flowing down to 5ml/sec. The wheel spins freely and speed of rotation is proportional to flow rate. Maximum recommended flow rate up to 95ml/sec. Max 2 bar pressure. The indicator is not to be used with corrosive fluids or temperature over +85°C. Can be used with gases. -
Stepless speed change and strong torque output for dispersal, emulsification, homogenization, mixing and other experiments. Different stators can be replaced by a single step. Suitable for dispersing, emulsifying, homogenizing and mixing of medium viscosity material solids and liquids. -
High-performance motor, strong torque output, accurate speed display, and three different stators, capable of dispersing, emulsifying, homogenizing and other functions in the laboratory. -
Double stator design, stepless speed change and strong torque output. The double stator structure increases the shearing effect twofold. It is equipped with many kinds of stator and can be used interchangeably according to process requirements. Suitable for dispersing, emulsifying, homogenizing and mixing of medium viscosity materials solids and liquids. -
Perfect dispenser to be used for aluminium folios and cling films. Easy and safe to use; Place the roll inside the box, press the lid, pull the necessary length out and start cutting. An easy and clean cut without waste is guaranteed with sharp cutting teeth. Lightweight ensures easy handling with one hand. -
Please Specify the dimension that you require when you request for a quotation. Manufactured from polished, pure aluminium sheet for wrapping and sealing of various labware. Due to the characteristics also convenient to form temporary containers. Offers ideal use during autoclaving, heating, freezing applications. -
Manufactured from Polyoxymethylene. The self-sprung forceps with rounded ends is autoclavable. The middle are molded with lines for better gripping. -
Manufactured from high quality, chemical and corrosion resistant AISI 304 grade stainless steel. Most commonly used forceps for dissecting. Featured with an inclined fine sharp point tip without jaw. Robust and seamless construction guarantees long life cycle. Grid line on the middle part of the body enables safe and easy handling.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
