-
Manufactured from high Impact polystyrene. There are 20 pcs of sterile inoculating loops in each polybag. -
Manufactured from polypropylene. The Smaller Pot (Art. 142) is useful for storing or wet sterilising dissecting isntruments. The Larger Pot (Art. 143) are for longer instruments. They could also be used as drip containers or soak jars. The wide base makes them very stable. Autoclavable. -
The Art. 548 is a tough 12L autoclavable tray for variety usage. It can hold 18x500ml or 12x1L bottles. The Art. 952 is a strong PVC tray for holding sample bottles with base diameter not greater than 22mm. It is ideal for 7ml (1/4oz) Bijou bottles or specimen tubes. Each of the nine rows can hold 12 of such bottles, making a total capacity of 126. -
Manufactured from PVC, and useful putting various small items such as rulers, erasers, pencil, etc in the desk drawers. Can also be used to carry item such as stir bars, connectors, pipettes, etc. -
500ml, 63 x 73 x 213mm Manufactured from polyethylene. The wash bottle can be filled with distilled water or any medicated liquid intended for ophthalmic use. The bottle has an eye cup with a specially deigned snap-on cap for fast and convenient eye washing to remove any foreign objects and prevent serious damage to vision. An automatic valve is incorporated in the head to admit air and prevent the contaminated eyewash from flowing back into the bottle. The eyecup has a perforated plate to break up the stream and provide a uniform spray to the eye. Also includes a tube to drain the contaminated eyewash. SUITABLE FOR FOODSTUFF. -
Manufactured from highly translucent and semi-rigid polyethylene with thick walls and crush-resistant corners. Ergonomic shape offers easy grip and easy squeeze during use. Integral moulded delivery tube delivers the liquid in the bottle until the last drop. Delivery tube guarantees a fine and straight flow with an application of a slight pressure on the body. The tip of the delivery tube can be cut to increase the flow rate. A closure cap attached to the delivery tube prevents contamination when the wash bottle is not used. -
Manufactured from polyethylene. The easy squeeze wash bottles with integral moulded tube. Dispensing tip which is provided with PE closure cap can be cut back to increase flow. The cap can also be used with bottles series 15801 - 1631. The special shape provide easier grip and stability. Suitable with foodstuff. -
Manufactured from transparent non-toxic, autoclavable PVC. Non-aging and non-oxidizing. The hoses are come in 20 meter rolls packed in PE bags. For the easy of use, every meter of the hose are marked. **Hose Selector is not included. Technical Data Chemical ResistanceColor Clear Odour None Taste None Toxicity Non-Toxic Ageing None Oxidation None Strong Acids Good Weak Acids Excellent Strong Alkalis Good Weak Alkalis Excellent Organic Solvents Fair -
050.06.001 150 x 150mm Manufactured from galvanized steel with a ceramic circular plate at the center. -
Isopropanol, Technical Grade, 5L/Bottle (T/G IPA-5L) -
More than 20 products from part of the J-QUANT® range within which there may be more than one test for the same compound to cover different ranges. These extra convenient J-QUANT® test strips allow the end user to carry out quality checks and in-process determinations. -
Manufactured from neutral glass with thick walls and crush-resistant corners. Ideal for safe storage and transportation of liquids and powders. Caps are made from enameled steel with large ridges with increased grip. Cap inner design ensures hermetical and leak-proof closure. -
Manufactured from special formulated polypropylene with thick walls and crush-resistant corners. Resistant to most acids, bases, and many commonly used solvents. Guarantees high temperature resistance between -20°C to +121°C Ideal for safe storage and transportation of liquids and powders. Caps are made from polypropylene with large ridges and increased grip. Inner cap design ensures hermetical and leak-proof closure. -
Jars are isostatically moulded with thick wall construction, smooth internal finish and screw cap. -
These odor-natural, impervious to light and rust proof bottles are manufactured from aluminium. Ideal for storing, transporting and delivery of samples and products which have to be stored totally unhaltered. Featured with a sturdy carrying handle, an insert plug and a cap with a locking ring ensuring safe sealing of the bottle content. Round neck form allows unrestricted liquid flow without leaving any residue at the bottle neck. -
Manufactured from UV stabilised, thick polyethylene with sturdy carrying handles. Ideal for safe storage, transportation and dispensing of liquids. Featured with a wide neck for easy filling and draining. Caps are made from polypropylene with large ridges with increased grip. Cap featured with self-locking internal security ring ensures hermetical and leak-proof closure. -
Ideal for lubricating and leak-proof sealing of all types of joints, metal, and plastic connectors and stopcocks. Recommended to be used under high vacuum conditions. Non-solidifying during use. Easily washable due to the water-soluble characteristic. -
Ideal for lubricating and leak-proof sealing of all types of joints, metal, and plastic connectors and stopcocks. Recommended to be used under standard vacuum conditions. Guarantees excellent chemical and temperature resistance between -40°C to +300°C. Non-solidifying during use. Easily washable due to the water-soluble characteristic. Best results can be achieved by application of a thin layer. -
Manufactured from heat resistant, durable borosilicate glass according to DIN 12360 standards. Thick wall, heavy base, and reinforced rim prevent breakage during washing and transportation. Perfectly ground NS necks with smooth interior guarantee excellent leak-proof closure. Volume graduations and inscriptions are printed with white enamel. -
Kurderna-Danish Flask for evaporation set up. Top joint is 24/40 outer while the lower joint is 19/22 inner. -
Manufactured from polystyrene. The disposable L-shaped sterile spreaders is suitable for bacteriology. It has a special 100° angling for easier use and is handy for dispersing liquids across agar culture plates. Available in single-wrapped or in packs of 5. -
The Perfect organizer for fast and efficient use of labels. Manufactured from clear acrylic and holds 6 label boxes at a time. Simple drop the label box in the label dispenser and feed the paper through the slot. A weighted base with non-skid pads prevent sliding or lifting. Featured with a pen for marking on the labels. -
Manufactured from poly fibre grade flexible paper with acrylic resin adhesive back. This unique combination expands and retracts together with temperature fluctuations and guarantees always a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -196°C to +80°C temperature range. Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue. Recommended to be used on tube caps with different diameters. Supplied as rolls packed in a dispenser box for practical use. Supplied as white colour or as “rainbow pack” pack of 6 different colours matching the universal hazard colour codes. -
Manufactured from poly fibre grade flexible paper with acrylic resin adhesive back. This unique combination expands and retracts together with temperature fluctuations and guarantees always a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -40°C to +121°C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue. -
Manufactured from polypropylene flexible paper with acrylic resin adhesive back. This unique combination expands and retracts together with temperature fluctuations and guarantees always a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -96°C to +121°C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue. -
Specially recommended for curved and cornered shaped labware such as round bottom flasks. Uniquely designed convex swivelling brush head gets contact with all over the surface of the flask including difficult curves and corners and enables thorough cleaning. The brush head has a slightly convex shape for fast and effective cleaning even also at heavy soiled flasks. Strong yet flexible bristles provide long lasting trouble free life cycle. Good grip due to the solid and long wooden handle. The swivel brush part fits through NS 29/32 or larger or any non-tapered neck with a diameter 24 mm or larger. 360 mm length brush handle offers an easy touch of the bottoms of larger size flasks. -
Specially recommended for labware with a narrow neck and a wider base such as flasks, Erlenmeyer, bottles etc. Feautured with a flexible body which perfectly adapts to the base and interior wall shape of the vessel to be cleaned. Offers perfect cleaning also for large size labware -
Specially recommended for hoses, tubings with diameter from 12 mm to 25 mm. Perfectly adapts to the rounding of the tube and flexible long handle enables even the round labware can be cleaned effectively. -
Specially recommended for tubes due to the unique design which fits all tube sizes from the smallest to the largest diameter. Consists of two parallel cleaning brush rods hold to be a single head. The rods can be pulled and moved to sides. This feature enables the contact of the brush all over the interior surface of different tubes with different diameters. This tube brush with its unique features guarantees fast and very effective cleaning of all tubes with different size and length. -
Specially recommended for all labware with a cylindrical form such as cylinders, beakers, vertical tanks and other similar flasks. Guarantees perfect cleaning with its spherical cleaning brush part that touches every surface and corner of labware’s interior. -
Excellent tools for washing and cleaning of all type of laboratory bottles, flasks, tubes, condensers, burettes etc. Brush material is manufactured from the highest quality of fibre/perlon for a long life cycle. Brush stem is manufactured from corrosion proof twisted steel wire. Brush handle is manufactured from polypropylene and offers extremely easy handling and use of the brush. Unique handle design enables hanging of the brush to a convenient place for easy reach. Spherical sponge top part enables access to every corner of the labware and guarantees perfect cleaning results. -
Table and base plate are manufactured from anodized aluminium. Scissors are made from stainless steel. Large control knob enables smooth and continuous control of table height.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
