-
For use with vacuum manifolds having 35/20 socket joints. Please order the pump adapter and socket clamp separately. -
Dewar style trap condenser designed for large volume solvent removal. Choice either stopcock for better vacuum PTFE stopcock for grease-free operation. With 10mm hose connections. -
Small scale dry ice, Deward style trap. The dry-ice chamber is 40mm I.D. x 60mm in length.For grease-free operation, you may choose PTFE(Teflon) stopcock type. -
Manufactured from polypropylene. Ø62, 118mm height, max pipette cap 25ml. The pipetting device is easy to use and able to draw up and measure any liquid (including most viscous liquid) Vadosa fits every type and size of pipette from 0.1 to 25ml and will delivery smallest quantities with precision and speed. It requires only one hand to operate the device. -
FeaturesA wide range of measurement and control, 1-1,000mbar.Two control modes of single-point control and programmed control available for choice as needed.Can store up to 5 programs, each containing up to 5 segments of programming control.A large-size TFT touch screen display control allows easy operation.All parts in contact with vapor or liquid are made of PTFE, ceramics or other high-performance materials and can effectively resist corrosion caused by organic solvents, water, acid and alkali.A built-in vent valve can feed inert gas into system equipment.One-stroke decompression allows easy installation and dismantling of vacuum system.Can be connected with pump power control for temporary shutdown of pump power supply after reaching stable degree of vacuum for energy conservation and environmental protection. Can also be operated in the normally open statue of pump. -
Solid phase peptide synthesis vessels feature 2mm PTFE stopcocks and fritted supports for resin beads during operation. The 24/40 inner drip joint can be assembled with other standard ware. The vessel has a 8mm hose connection for vacuum and the stopcock has an 8mm O.D. sidearm for inert gas introduction. Vesserls are supplied with PTFE-faced siliconen lined Nylon Cap. -
Supplied with one holed compression cap, one Viton O-Ring and one Teflon-faced silicone rubber septum. For replacement caps, see RC112; F0r Viton O-Rings, See R014; for septa, see R1420. -
Vials can be used for storage and shipping of valuable or aggressive materials, and for small scale reactions at low pressure. Thick walled design with tapered inner. Suitable for use to a maximum of 8psi at room temperature. -
Dispensing pump made of PP operated by a unique lever-action stroke. Delivery of approximately 10 ounces (ab. 300ml) per stroke, with capability of 6 gallons per minute (ab. 22-23 litres/min). Will handle the most viscous materials (equivalent to SAE 90 oil) Spigot orientation of 360° allows versatility in dispensing. Complete with shank. -
Manufactured from optical PS. 12 x 12 x 45mm The cuvettes is used for spectrophotometry application in visible spectrum. Equipped with optically machined walls to ensure optimal transparency along the spectral field from 340 to 800nm (Optical PS), and from 280 - 800nm (UV grade PMMA). It is recommended for most of the common biological and biotechnological applications. -
Shirt collar design visitors gown without a hood and without pockets. Closure is provided with snap fasteners. Featured with rubber fasteners at the wrist. For single use. Manufactured for visitors protection at laboratories. Slightly porous texture of the textile ight weight. Easy to wear. Soft and flexible texture offers full comfort during use. Universal cut for fitting all body sizes. -
Viton O-ring compatible for solvent and chemical . -
Manufactured from polymethylpentene. These crystal clear volumetric flasks creates no meniscus so the final reading are easy and accurate to observe. The flasks has been calibrated gravimetrically at 20%, and the thick walls eliminates distortion. The thin neck allows a more precise measurement. Autoclavable to 170°C, chemically cleaner than glass and chemically non-absorbent. Stopper is included with the flask. Suitable for foodstuff. -
Manufactured from polymethylpentene. These crystal clear volumetric flasks creates no meniscus so the final reading are easy and accurate to observe. The flasks has been calibrated gravimetrically at 20%, and the thick walls eliminates distortion. The thin neck allows a more precise measurement. Autoclavable to 170°C, chemically cleaner than glass and chemically non-absorbant. Stopper is included with the flask. Suitable for foodstuff. -
Manufactured from PFA. The volumetric flask has a high chemical and temperature resistance of -250°C to +270°C. The flasks are supplied with standard DIN stoppers made of PFA. Individually calibrated ring mark according to DIN EN ISO 1042, Class "A" standard. -
Manufactured from polypropylene. The volumetric flasks create no meniscus so final readings are easy. They are calibrated gravimetrically at 20°C. Translucency of PP enhanced when in contact with liquids. The thick walls eliminate any distortion and the thin neck allows a more precise final reading. Autoclavable, chemically non-absorbent, and stopper is included with the flask. -
Manufactured from polymethylpentene (PMP). These crystal clear volumetric flasks creates no meniscus so the final reading are easy and accurate to observe. The flasks has been calibrated gravimetrically at 20%, and the thick walls eliminates distortion. The thin neck allows a more precise measurement. Autoclavable to 170°C, chemically cleaner than glass and chemically non-absorbant. Stopper is included with the flask. Suitable for foodstuff. -
Manufactured from neutral tubing according to ISO 648 and DIN 12687 & ISO 835 and DIN 12699 standards. Alternative 2 standards: DIN/ISO Class A & B Carefully formed and beveled tips ensure proper flow rate. Inscriptions and nominal values are printed with amber stain. Color coded ring marks at suction stem allows fast identification and sourcing. -
Wall Mounted Emergency Eye Wash, 304 Stainless Steel, suitable for indoor use. -
Wall Mounted Emergency Shower for Indoor use, made with 304 Stainless Steel. -
Manufactured from ABS for safe and convenient transportation up to 6 wash bottles. Although highly recommended for 500mL bottles can also carry 250mL bottles. Strong, light weight body construction and ergonomic handle offer both comfort and control Easily stackable due to tapered body form for reducing storage space. -
Manufactured from polyethylene. The wash bottle is ideal for distilled water. The stream of liquid is regulated by hand pressure. Dispensing tip gives ultra-fine stream or can be removed to increase flow. Suitable for foodstuff. -
Manufactured from highly translucent and semi-rigid polyethylene with walls and crush-resistant corners. Round neck form allows unrestricted liquid flow without leaving any residue at the bottle neck. Flexible delivery tube guarantees a fine and straight flow with an application of slight pressure on the body. "Goose neck" design of the delivery tube guarantees easy and precise reaching to the flask corners. Tip of delivery tube can be cut to increase the flow rate. -
Manufactured from highly translucent and semi-rigid polyethylene (PE) with walls and crush-resistant corners. Colored body and caps enables fast, easy and practical identification of bottle content. Round neck form allows un-restricted liquid flow-out without leaving any residue at the bottle neck. Flexible delivery tube guarantees a fine and straight flow with an application of a slight pressure on the body. "Goose neck" design of the delivery tube guarantees easy and precise reaching to the flask corners. Tip of the delivery tube can be cut to increase the flow rate. -
Manufactured from high translucent semi-rigid polyethylene with thick walls and crush-resistant corners Round bottle allows unrestricted liquid flow out without living any residue at bottle neck Angled delivery tube guarantees fine and straight flow with application of slight pressure on body Dispensing tube design offers optimum backflow and turbulance free liquid transfer Caps inner design ensure hermetical leak-proof closure -
Manufactured from highly translucent and semi-rigid polyethylene with walls and crush-resistant corners Round Neck form allows unrestricted liquid flow out without leaving any residue at the bottle neck. Dispensing tube design offers optimum backflow and turbulance free liquid transfer. Chemical names, formulas, CAS numbers and other key safety information printed in 4 languages (English/French/German/Spanish) -
Manufactured from polyethylene. Fits to kartell bottles part no. 15801, 15821, 15841, 15861, 15881, 15901. -
Looped Logic oily waste cans are made of high density PP material, which can resist strong corrosive chemicals. The tank can body, equipped with self-close mechanism, can avoid dents, penetration and fragility caused by corrosion. The can stops ignition source from entering the tank can body while operating the hazards. All oily waste cans are equipped with stainless steel hardware which is chemical resistant. -
The polypropylene made watch glass are very stable having a molded base. It can withstand temperatures up to 120°C. -
Manufactured from PTFE. The watch glass has superior chemical, mechanical and heat resistance. It can be safely used for continuously at temperature up to 250°C. Suitable for foodstuff. -
Manufactured from soda-lime glass according to DIN 12341 standard. Ideal tools also for evaporation applications and for covering the hot beakers. Fire polished edges prevent chipping and avoid breakage. -
Manufactured from borosilicate 3.3 for determination of water with xylol method. System consists of a 500ml flask with NS 29/32 joint, a Liebig condenser of 400 mm length and a measuring tube with PTFE stopcock.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
