-
Kurderna-Danish Flask for evaporation set up. Top joint is 24/40 outer while the lower joint is 19/22 inner. -
Manufactured from polystyrene. The disposable L-shaped sterile spreaders is suitable for bacteriology. It has a special 100° angling for easier use and is handy for dispersing liquids across agar culture plates. Available in single-wrapped or in packs of 5. -
The Perfect organizer for fast and efficient use of labels. Manufactured from clear acrylic and holds 6 label boxes at a time. Simple drop the label box in the label dispenser and feed the paper through the slot. A weighted base with non-skid pads prevent sliding or lifting. Featured with a pen for marking on the labels. -
Manufactured from poly fibre grade flexible paper with acrylic resin adhesive back. This unique combination expands and retracts together with temperature fluctuations and guarantees always a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -196°C to +80°C temperature range. Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue. Recommended to be used on tube caps with different diameters. Supplied as rolls packed in a dispenser box for practical use. Supplied as white colour or as “rainbow pack” pack of 6 different colours matching the universal hazard colour codes. -
Manufactured from poly fibre grade flexible paper with acrylic resin adhesive back. This unique combination expands and retracts together with temperature fluctuations and guarantees always a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -40°C to +121°C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue. -
Manufactured from polypropylene flexible paper with acrylic resin adhesive back. This unique combination expands and retracts together with temperature fluctuations and guarantees always a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -96°C to +121°C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue. -
Specially recommended for curved and cornered shaped labware such as round bottom flasks. Uniquely designed convex swivelling brush head gets contact with all over the surface of the flask including difficult curves and corners and enables thorough cleaning. The brush head has a slightly convex shape for fast and effective cleaning even also at heavy soiled flasks. Strong yet flexible bristles provide long lasting trouble free life cycle. Good grip due to the solid and long wooden handle. The swivel brush part fits through NS 29/32 or larger or any non-tapered neck with a diameter 24 mm or larger. 360 mm length brush handle offers an easy touch of the bottoms of larger size flasks. -
Specially recommended for labware with a narrow neck and a wider base such as flasks, Erlenmeyer, bottles etc. Feautured with a flexible body which perfectly adapts to the base and interior wall shape of the vessel to be cleaned. Offers perfect cleaning also for large size labware -
Specially recommended for hoses, tubings with diameter from 12 mm to 25 mm. Perfectly adapts to the rounding of the tube and flexible long handle enables even the round labware can be cleaned effectively. -
Specially recommended for tubes due to the unique design which fits all tube sizes from the smallest to the largest diameter. Consists of two parallel cleaning brush rods hold to be a single head. The rods can be pulled and moved to sides. This feature enables the contact of the brush all over the interior surface of different tubes with different diameters. This tube brush with its unique features guarantees fast and very effective cleaning of all tubes with different size and length. -
Specially recommended for all labware with a cylindrical form such as cylinders, beakers, vertical tanks and other similar flasks. Guarantees perfect cleaning with its spherical cleaning brush part that touches every surface and corner of labware’s interior. -
Excellent tools for washing and cleaning of all type of laboratory bottles, flasks, tubes, condensers, burettes etc. Brush material is manufactured from the highest quality of fibre/perlon for a long life cycle. Brush stem is manufactured from corrosion proof twisted steel wire. Brush handle is manufactured from polypropylene and offers extremely easy handling and use of the brush. Unique handle design enables hanging of the brush to a convenient place for easy reach. Spherical sponge top part enables access to every corner of the labware and guarantees perfect cleaning results. -
Table and base plate are manufactured from anodized aluminium. Scissors are made from stainless steel. Large control knob enables smooth and continuous control of table height. -
Ladle for sampling with fixed handle and pouring spouts on both sides of the container. -
Glove, Latex, Powder Free, Thickness 4 mil, Milky White, Textured, Disposable, Single Use, Ambidextrous, Material Conformance to ASTM D3578, FDA 510(K), EN-455-1, 2 & 3, Quality Assurance : ISO 9001/EN 13485 (German TUV Standards), GMP Standards, 100 gloves per box, Excellent fit and feel, High Tensile strength minimizes tears, Beaded cuff for easy donning. -
Manufactured from natural high quality latex. The Supreme Latex Gloves are good chemical resistance to acids, alkalis and detergents. It has excellent flexibility, good barrier protection against blood-borne pathogens and other substances. It should be stored in a dry condition at temperature not higher than 30°C. Shelf life of 5 years from manufactured date.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
