-
Kartell Art. 200 Manufactured with Red Rubber. The moulded rubber bulb with three glass ball valves which can be controlled by finger pressure. The filler can be used with all liquids except for those that are corrosive to rubber. Can be used on bulb or cylindrical pipettes of different capacity. comes complete with adapter for pipettes with capacities more than 20ml. -
Made of PVC. Designed to hold about 30 pipettes. It has 4 compartments to accommodate pipettes of 1-2-5-10 mL capacities. -
Manufactured from polyvinyl chloride. 216 x 283 x 40mm height. The tray can accomodate 7 pipettes with overall stem diameter not exceeding 20mm longitudinally, or 16 pipettes with stem diameter not exceeding 10mm laterally. Very useful workstation holder not only for pipettes. -
Manufactured from polypropylene. Ø82, 426mm height. The versatile Jar is suitable for storing pipettes. The pipettes will be cushioned by the PP so there is reduced chances of having a chipped end pipettes. The jar can be autoclaved at 120°C for 20 minutes (The PE cap cannot be autoclaved). The welded flanged base gives an excellent stability and the tight fitting cover protects the pipeetes during transportation from dust, etc. Jar can be easily cut down to suit shorter length pipettes and can be canted on side for drainage. -
Manufactured from polypropylene. The 94 place rotary pipette holder has a rotating base. The swivel stand accommodates 94 pipettes with diameter not exceeding 14mm. -
Manufactured from polypropylene. 200 x 75 x 150mm height. The stand can accomodate 8 pipettes with diameters not exceeding 10mm, plus 8 pipettes with diameters not exceeding 15mm. Small holes in the base allow drainage. -
Manufactured from polypropylene. The stand can accommodate 18 pipettes with diameter not exceeding 10mm, plus 10 pipettes with diameters not exceeding 15mm. Small holes at the base allows drainage. holder can be adjusted 8-14mm. Use the custom designed dished base unit with PVC rod (Art.262) to complete the system. -
Manufactured from polyethylene/polypropylene. The automatic rinsing set solves the problem of washing pipettes up to 600mm long and Mohr burettes quickly and safely. The PE rinser fills via the spray nozzle that is situated at the top rim, which will prevent back-siphoning.The contaminated water will be siphon out once the siphon point at the top of the rinder has been reached. The pipettes/burettes are housed in a specially designed basket which minimizes breakages as it buffers the tips of pipettes against the soft PE base. two or three basket of pipettes/burettes can be soaking in their jars whilst another basket full is being washed in the rinser. Suggested basic set:Pipettes Burettes 1x217 1x215 2x219 2x219 1x218 2x1219 1x218 -
Manufactured from Polymethylmethacrylate (PPMA). The bench pipette holder has high level finishes and its content can be seen from any angle. Complete with four tilted support shelves and a white top. The four separate compartments are ideal for housing plastic or glass serological pipettes of various capacities (from 1 to 50ml). Do not shine ultraviolet light on it.* -
Manufactured from polypropylene. Ø160, 49mm height. The round bottomed flasks from the smallest up to 10 litres can be supported safely on the internal "steps" of this support. Can withstand hot flasks up to 100°C (120°C for short periods) without damaging the holder. Autoclavable. -
Manufactured from polypropylene and comes with chromium plated steel rods. The rods are 25cm standard length and can be screwed together to obtain the desired height. Each base is supplied with two rods. -
Manufactured from polypropylene. The Boss head is supplied with two olives so that the clamp can fit on to the support rods. having diameters 8-14mm. The stainless steel spring loaded centre arm can hold the burette firmly against the two outer arm and is protected by rubber grips. The graduation and meniscus are visible at all times. Made suitable for all burettes. -
Manufactured from Polyoxymethylene. The self-sprung forceps with rounded ends is autoclavable. The middle are molded with lines for better gripping. -
Manufactured from Glass Fibre Nylon. The Spatula is made according to DIN 12890 standard. These range of robust, inexpensive general purpose spatulas has an excellent chemical resistance. The scraper plus spoon or double scraper configuration is suitable for use in food and beverages industry. Autoclavable, and suitable for food contact (NSF/ANSI Standard 51). -
Manufactured Polyoxymethylene (POM). The plastic clamps are made for the safe connection of standard-finish glass conical joints. It is corrosion proof and will not scratch glasses. Available in various colors according to the dimension. Autoclavable. -
Manufactured from polypropylene. The single or double holder is made for funnels as small as 25mm (with adaptor supplied) and up to 170mm. Without the adapter, it can be used with powder funnel with stem diameter not exceeding 35mm. Two olives are provided for use with rods from 8-14mm.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
