-
Manufactured Polyoxymethylene (POM). The plastic clamps are made for the safe connection of standard-finish glass conical joints. It is corrosion proof and will not scratch glasses. Available in various colors according to the dimension. Autoclavable. -
Manufactured from polypropylene. The single or double holder is made for funnels as small as 25mm (with adaptor supplied) and up to 170mm. Without the adapter, it can be used with powder funnel with stem diameter not exceeding 35mm. Two olives are provided for use with rods from 8-14mm. -
Made of High Impact PS. The back plate of the 72 place support is made from a single mold of 4 mm rigid HIPS. The peg sockets have closed ends eliminating leakage and consequent bio hazards. The seamless drip channel collects waste which drains via drain tube provided. 72 push in pegs which can accommodate items with “neck” bore in excess of 15 mm are supplied and 11 small pegs of diameter 6 mm for small diameter items such as test tubes. They are easily removable for cleaning or to accommodate particularly shaped items. This rack will not stain or rust. Comes complete with mounting kit, draining hose, and fixing template. Additional racks can be joined together to make a bank of racks, using the joining plugs provided. Supplied with draining kit (connector + tubes). Discharging tube: internal 11 mm, external 13 mm. -
Dispensing pump made of PP operated by a unique lever-action stroke. Delivery of approximately 10 ounces (ab. 300ml) per stroke, with capability of 6 gallons per minute (ab. 22-23 litres/min). Will handle the most viscous materials (equivalent to SAE 90 oil) Spigot orientation of 360° allows versatility in dispensing. Complete with shank. -
Made of PP. The 60° angles sides are provided with ribs for fast filtration and allow the use of standard size filter papers. Suitable for foodstuff -
Manufactured from polypropylene. The Analytical Funnel is designed specifically for analytical chemistry. Each size takes a standard size filter paper. The body of the funnel is exactly 60° angle. Designed with external and internal ribs, the funnel is autoclavable. Suitable for foodstuff. -
Made of High Impact PS. Light, Portable hand operated vacuum pump. Attains a vacuum of 625mm Hg (25"). Pumping rate is 15ml per stroke. Built in vacuum release valve. Can be used as pressure pump by transferring release valve cap to vacuum port. Nozzle fits standard 6mm (1/4") i.d tubing. -
Manufactured from polyethylene. The disk is a useful interface between the filter paper and perforated Buchner plate. It helps avoid the clogging of the filter holes. The texture is 300 micron(μm). -
Manufactured from polypropylene. The two-piece construction buchner funnel is lightweight, robust, unbreakable, and resistant to corrosion and heat. The top and bottom can be separated for easy and total cleaning. It is Autoclavable and has a Excellent chemical resistance. Suitable for foodstuff. -
Manufactured from PP inner Disk: Dutral The non-return valve prevents water from flowing back when the pressure falls. It is useful for any tubing system and vacuum line. The Maximum safe working pressure is 2Bar (approx. 28.4P.S.I), and the Minimum safe working pressure is 0.07 Bar at room temperature 20°C. -
Manufactured from polypropylene. The pump works on pressure up to 10Kg/cm2. The built in non-return valve will eliminate any back flow. Can be easily dismantled for cleaning and autoclavable. -
Manufactured from polypropylene. These plates are extremly useful as support for crucibles, petri dishes, etc. For use at room temperature. Not suitable for use with hot crucible. -
Manufactured from PP/PC. The desiccator is implosion proof and will take vacuum of -740mm Hg with loss (absolute zero -760 mm/HG) not exceeding 20mm Hg in 24 hours. The transparent polycarbonate cover seals onto a neoprene '0' ring set into the flange of the PP base. To help with establishing the initial vacuum, grease can be applied on the 'o' ring. Within the desiccator is a removable pan for holding a drying agent. Vacuum release tap/non return valve assembly is included (Art. 229); specially grooved stopper in this assembly allows air when required to be re-admitted very slowly to avoid disturbing the contents. Usage instruction: •Remove the cover in PC - insert the samples in the pan •Open the vacuum retention valve (PE needle) and connect the tube of the pump to the desiccator spigot to create vacuum. •Close the vacuum retention valve after -
Made of PMMA. Clear acrylic resin microscope cover with a square base; protects against dust and dirt. -
Made from Polystyrene. For colorimetric Assay. -
Art. 356 Made from Polyethylene. With three round depression. Particularly useful for colorimetric tests.
We have retired the old website, please let us know if you encounter any issues here
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Tel: +65 6777 7077
Email: marketing@hcs-lab.com
Get in touch with us today for any inquiries, assistance, or collaborations. We’re here to help!
Copyright ©2026 | HCS Scientific & Chemical All Rights Reserved
